Sony 4-139-513-11(1) 用户手册
44
The CONTROL FOR HDMI function does
not work.
not work.
, Make sure that the connected component is
compatible with the CONTROL FOR
HDMI function. Please refer to the
operating instructions of the component for
detailed explanation.
HDMI function. Please refer to the
operating instructions of the component for
detailed explanation.
, Make sure that the TV’s input is switched to
DVD player so that the signal from the
player appears on the TV screen, and
“CONTROL FOR HDMI” is set to “ON”
(page 41).
player appears on the TV screen, and
“CONTROL FOR HDMI” is set to “ON”
(page 41).
‘BRAVIA Sync’ display does not appear.
, Turn off any display of the DVD player
displays. Then, try again.
, Please return to the one screen mode if your
TV is in two screen mode. Then, try again.
Your TV automatically turns on or the TV’s
input is switched to the player.
input is switched to the player.
, “CONTROL FOR HDMI” is set to “ON”
(page 41). Switch this function to “OFF”.
Display language on the screen switches
automatically.
automatically.
, When “LANGUAGE FOLLOW” is set to
“ON” in the “HDMI SETUP” (page 41), the
display language on the screen
automatically switches, according to the
language setting of the connected TV, if you
change the language settings on your TV,
etc.
display language on the screen
automatically switches, according to the
language setting of the connected TV, if you
change the language settings on your TV,
etc.
USB (DVP-NS728H only)
The player does not detect a USB device
connected to the player.
connected to the player.
, The USB device is not securely connected
to the player (page 18).
, The USB device or a cord is damaged.
, Disc mode has not been switched to USB
, Disc mode has not been switched to USB
mode.
, Compatibility with all encoding/writing
softwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or
interrupted audio or may not play at all.
media cannot be guaranteed. Incompatible
USB device may produce noise or
interrupted audio or may not play at all.
Self-diagnosis Function
(When letters/numbers appear on the
screen)
When the self-diagnosis function is activated
to prevent the player from malfunctioning, a
five-character service number (e.g., C 13 50)
with a combination of a letter and four digits
appears on the screen. In this case, check the
following table.
to prevent the player from malfunctioning, a
five-character service number (e.g., C 13 50)
with a combination of a letter and four digits
appears on the screen. In this case, check the
following table.
First three
characters of
the service
number
characters of
the service
number
Cause and/or corrective
action
action
C 13
The disc is dirty or recorded
in a format that this player
cannot play (page 45).
, Clean the disc with a
in a format that this player
cannot play (page 45).
, Clean the disc with a
cleaning cloth or check its
format.
format.
C 31
The disc is not inserted
correctly.
, Re-insert the disc
correctly.
, Re-insert the disc
correctly.