Sony BDP-SX90 用户手册

下载
页码 28
5
On cleaning
• Clean the cabinet, panel, and controls with a 
soft cloth slightly moistened with a mild 
detergent solution. Do not use any type of 
abrasive pad, scouring powder or solvent such 
as alcohol or benzine.
• Wipe the LCD surface with the soft dry cloth 
lightly. To prevent dirt buildup, wipe it 
frequently.
Do not wipe the LCD surface with a wet cloth. 
If water enters, a malfunction may result.
• If picture/sound is distorted, the lens may be 
covered with dust. In this case, use a 
commercially-available blower brush for 
camera lenses to clean the lens.
Avoid touching the lens directly during 
cleaning.
On cleaning discs, disc/lens cleaners
Do not use cleaning discs or disc/lens cleaners 
(including wet or spray types). These may cause 
the apparatus to malfunction.
On replacement of parts
In the events that this player is repaired, repaired 
parts may be collected for reuse or recycling 
purposes.
On connecting to the HDMI OUT jack
Observe the following as improper handling 
may damage the HDMI OUT jack and the 
connector.
• Carefully align the HDMI OUT jack on the 
right of the player and the HDMI connector by 
checking their shapes. Make sure the 
connector is not upside down or tilted.
• Be sure to disconnect the HDMI cable when 
moving the player.
• Hold the HDMI connector straight when 
connecting or disconnecting the HDMI cable. 
Do not twist or force the HDMI connector into 
the HDMI OUT jack.
Notes About the Discs
• To keep the disc clean, handle the disc by its 
edge. Do not touch the surface. 
Dust, fingerprints, or scratches on the disc 
may cause it to malfunction.
• Do not expose the disc to direct sunlight or 
heat sources such as hot air ducts, or leave it in 
a car parked in direct sunlight as the 
temperature may rise considerably inside the 
car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe the 
disc from the center out.
• Do not use solvents such as benzine, thinner, 
commercially available disc/lens cleaners, or 
anti-static spray intended for vinyl LPs.
• If you have printed the disc’s label, dry the 
label before playing.
• Do not use the following discs.
– A lens cleaning disc.
– A disc that has a non-standard shape (e.g., 
card, heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker 
adhesive on it.
• Do not resurface the playing side of a disc to 
remove surface scratches.
,continued