Sony cd walkman d-ej985 用户手册
![Sony](https://files.manualsbrain.com/attachments/7e61ba04cadfce70cb41a1a70ef1d62a30f0a5fe/common/fit/150/50/682a2570dc00831b079177f57c62a2915dd3423eb752334060fbcf750d89/brand_logo.png)
27
Symptom
The CD does not play or
“Nodisc” appears in the
display when a CD is placed
in the CD player.
“Nodisc” appears in the
display when a CD is placed
in the CD player.
CHARGE lamp flashes on the
CD player when you press a
button, and the CD does not
play.
CD player when you press a
button, and the CD does not
play.
Cannot adjust the volume
with VOL +/– on the CD
player.
with VOL +/– on the CD
player.
During recording with optical
digital connection, the track
number cannot be recorded
correctly.
digital connection, the track
number cannot be recorded
correctly.
The rechargeable batteries
cannot be charged.
cannot be charged.
Cause and/or corrective actions
c The buttons are locked. Slide the HOLD switch back. (page 16)
c The CD is dirty or defective. (page 24)
c Check that the CD is inserted with the label side up. (page 7)
c Moisture condensation has occurred.
Leave the CD player aside for several hours until the moisture
evaporates.
evaporates.
c Close the lid of the battery compartment firmly.
(page 19)
c Make sure the batteries are inserted correctly. (pages 19, 22)
c Connect the AC power adaptor to an AC outlet securely. (page 7)
c The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW
with the recording device.
c There is a problem with the quality of the CD-R/CD-RW,
recording device, or application software.
c The buttons are locked. Slide the HOLD switch back. (page 16)
c The CD player is connected to an audio device. Adjust the volume
using the volume control on the connected device. (page 18)
c Record the track number again using a MiniDisc recorder, DAT
recorder, etc. (page 18)
c See the instruction manual that comes with the recording device.
(page 18)
c The terminals on the CD player or the charging stand are dirty.
Wipe them with a dry cloth.
c The CD is playing. Stop playing.
c The external battery case is connected to the CD player. Remove it
and start charging again.
c The CD player is not placed securely on the charging stand. Place
the player on the stand, aligning the V mark on the player and the
v mark on the stand. Make sure that the CHARGE lamp lights up.
(page 19)
v mark on the stand. Make sure that the CHARGE lamp lights up.
(page 19)
Additional information
(Continued)