Sony CDX-S2250V 用户手册
13
CDX-S2250V/S2250S/S2250
2-348-467-71 (1)
G:\SONY\07 CDX\0324\0324 CDX-S2250V nouhin\0324 CDX-S2250V\0324 CDX-
S2250V\2348467711\234846771CDXS2250VEUR\01GB02CD-EUR.fm
S2250V\2348467711\234846771CDXS2250VEUR\01GB02CD-EUR.fm
masterpage:Right
G:\SONY\07 CDX\0324\0324 CDX-S2250V nouhin\0324 CDX-S2250V\0324 CDX-
S2250V\2348467711\234846771CDXS2250VEUR\01GB02CD-EUR.fm
S2250V\2348467711\234846771CDXS2250VEUR\01GB02CD-EUR.fm
masterpage:Right
Removing the unit
1
Remove the protection collar.
1
Detach the front panel (page 4).
2
Engage the release keys together with the
protection collar.
protection collar.
3
Pull out the release keys to remove the
protection collar.
protection collar.
2
Remove the unit.
1
Insert both release keys simultaneously
until they click.
until they click.
2
Pull the release keys to unseat the unit.
3
Slide the unit out of the mounting.
Specifications
CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Tuner section
FM
Tuning range: 87.5 – 108.0 MHz
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)
Harmonic distortion at 1 kHz: 0.5 % (stereo),
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)
Harmonic distortion at 1 kHz: 0.5 % (stereo),
0.3 % (mono)
Separation: 35 dB at 1 kHz
Frequency response: 30 – 15,000 Hz
Frequency response: 30 – 15,000 Hz
MW/LW
Tuning range:
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
LW: 153 – 279 kHz
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity: MW: 30 µV, LW: 40 µV
Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity: MW: 30 µV, LW: 40 µV
Power amplifier section
Outputs: Speaker outputs (sure seal connectors)
Speaker impedance: 4 – 8 ohms
Maximum power output: 50 W
Speaker impedance: 4 – 8 ohms
Maximum power output: 50 W
×
4 (at 4 ohms)
General
Outputs:
Audio outputs terminal (sub/rear switchable)
Power aerial relay control terminal
Power amplifier control terminal
Power aerial relay control terminal
Power amplifier control terminal
Inputs:
Telephone ATT control terminal
Aerial input terminal
Aerial input terminal
Tone controls:
Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD)
Power requirements: 12 V DC car battery
(negative earth)
Dimensions: Approx. 178
×
50
×
178 mm (w/h/d)
Mounting dimensions: Approx. 182
×
53
×
161 mm
(w/h/d)
Mass: Approx. 1.2 kg
Supplied accessories:
Supplied accessories:
Parts for installation and connections (1 set)
Front panel case (1)
Front panel case (1)
Optional accessories:
Card remote commander: RM-X114
Rotary commander: RM-X4S (CDX-S2250V only)
Rotary commander: RM-X4S (CDX-S2250V only)
Design and specifications are subject to change
without notice.
without notice.
Orient the release
keys as shown.
keys as shown.
Hook facing
inwards.
inwards.
continue to next page
t
US and foreign patents licensed from Dolby
Laboratories.
Laboratories.