Sony cyber-shot dsc-t11 用户手册

下载
页码 128
96
Shooting still images/movies
The battery remaining 
indicator is incorrect, or 
sufficient battery 
remaining indicator is 
displayed but the power 
runs out soon.
• You have used the camera for a long time in an 
extremely hot or an extremely cold location. 
• A deviation has occurred in the remaining 
battery time.
• The battery pack is discharged. 
• The battery pack is dead (page 120)
p Fully discharge and then charge the battery pack so that the 
battery remaining indicator functions correctly (page 13).
p Install a charged battery pack (page 11).
p Replace the battery pack with a new one. 
The battery pack runs 
down too quickly.
• You are shooting/viewing images in an 
extremely cold location.
• The battery terminal is dirty.
• The battery pack is dead (page 120).
p Clean the battery terminal with a cotton swab, etc., and charge 
the battery pack.
p Replace the battery pack with a new one.
You cannot turn on the 
camera.
• The battery pack is not installed correctly.
• The AC Adaptor is disconnected. 
• The AC Adaptor has malfunctioned.
• The battery pack is discharged.
• The battery pack is dead (page 120).
• The camera is not properly installed to the USB 
cradle.
p Install the battery pack correctly (page 11).
p Properly connect the AC Adaptor (page 15).
p Consult your Sony dealer or local authorized Sony service 
facility.
p Install a charged battery pack (page 11).
p Replace the battery pack with a new one.
p Properly install the camera (page 10).
The power turns off 
suddenly. 
• If you do not operate the camera for about three 
minutes when using a battery pack, the camera 
turns off automatically to prevent wearing down 
the battery (page 16).
• The battery pack is discharged. 
• The camera is not properly installed to the USB 
cradle.
p Turn on the camera again (page 16) or use the AC Adaptor 
p Install a charged battery pack (page 11).
p Properly install the camera (page 10).
Symptom
Cause
Solution
The LCD screen is not 
turned on even when the 
power is turned on.
• The LCD backlight is turned off with 
 in the 
dark place.
p Turn on the LCD backlight with 
The subject is not visible 
on the LCD screen.
• The mode switch is not set to 
 or 
.
p Set it to 
 or 
 (pages 22 and 77).
Symptom
Cause
Solution