Sony DAV-SC8 用户手册

下载
页码 88
68
GB
x
DISTANCE
The default distance setting for the speakers in 
relation to the listening position is shown below.
Be sure to change the value in the Setup Display 
when you move the speakers.
Notes
• When you set the distance, the sound cuts off for a 
moment.
• If all front and surround speakers are not placed at an 
equal distance from your listening position, set the 
distance according to the closest speaker.
• Do not place the surround speakers farther away from 
your listening position than the front speakers.
• The DISTANCE setting is available except for Super 
Audio CDs.
x
LEVEL
You can vary the level of each speaker as 
follows. Be sure to set “TEST TONE” to “ON” 
for easy adjustment.
x
BALANCE
You can vary the balance of the left and right 
speakers as follows. Be sure to set “TEST 
TONE” to “ON” for easy adjustment.
To adjust the volume of all the 
speakers at one time
Use the VOLUME control on the system, or 
press VOLUME +/–.
x
TEST TONE
The speakers will emit a test tone to adjust 
“LEVEL” and “BALANCE.”
FRONT 
3.0 m
Front speaker distance from the 
listening position can be set in 0.2 
metre increments from 1.0 to 7.0 
metres.
CENTER 
3.0 m
Centre speaker distance can be moved 
up to 1.6 metres closer to the listening 
position from the front speaker 
distance, in 0.2 metre increments.
SURROUND
3.0 m
Surround speaker distance can be 
moved up to 4.6 metres closer to the 
listening position from the front 
speaker distance, in 0.2 metre 
increments.
3m
3m
3m
3m
3m
CENTER 
0 dB
Adjusts the level of the centre 
speaker (–6 dB to +6 dB, 1 dB 
increments).
SURROUND 
LEFT 0 dB
SURROUND 
RIGHT 0 dB
Adjusts the level of the surround 
speakers (–6 dB to +6 dB, 1 dB 
increments).
SUBWOOFER 
0 dB
Adjusts the level of the subwoofer 
(–6 dB to +6 dB, 1 dB increments).
FRONT
(CENTER)
Adjusts the balance between the front 
left and right speakers.
OFF
The test tone is not emitted from the 
speakers.
ON
The test tone is emitted from both left and 
right speakers simultaneously while 
adjusting balance. When you select one of 
the “SPEAKER SETUP” items, the test 
tone is emitted from each speaker in 
sequence.