Sony DAV-DZ531W 用户手册
23
GB
Ge
tting
tting
Star
te
d –
B
A
A
SIC –
9
Press
X/x to select the output method
for video signals.
• [VIDEO]: outputs video signals.
• [RGB]: outputs RGB signals.
• [RGB]: outputs RGB signals.
Note
• If your TV does not accept RGB signals, no
picture appears on the TV screen even if you
select [RGB]. Refer to the operating instructions
supplied with your TV.
select [RGB]. Refer to the operating instructions
supplied with your TV.
10
Press .
The Setup Display for selecting the speaker
formation appears.
formation appears.
11
Press
C/c to select the speaker
formation image as the speakers are
actually positioned.
actually positioned.
For details, see “Getting Optimal Surround
Sound for a Room” (page 78).
Sound for a Room” (page 78).
12
Press .
13
Connect the calibration mic to the
A.CAL MIC jack on the front panel and
press
A.CAL MIC jack on the front panel and
press
X/x to select [YES].
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic. Be quiet during the measurement.
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic. Be quiet during the measurement.
14
Press .
Auto Calibration starts.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
and neighbor.
volume down. Give consideration to children
and neighbor.
• Avoid being in the measurement area and
making noise during the measurement (which
takes about 1 minute), as it may interfere with
measurement.
takes about 1 minute), as it may interfere with
measurement.
SPEAKER FORMATION
STANDARD(WIRELESS)
AUDIO IN / A.CAL MIC
Calibration mic
Connect calibration mic. Start
measurement?
measurement?
YES
AUTO CALIBRATION
NO
continued