Sony dcr-hc40e 用户手册
Getting started
Get
ting st
ting st
art
e
e
d
17
The CHG (charge) lamp lights up and
charging starts.
charging starts.
After charging the battery
The CHG (charge) lamp turns off when the
battery is fully charged. Disconnect the AC
Adaptor from the DC IN jack.
battery is fully charged. Disconnect the AC
Adaptor from the DC IN jack.
To remove the battery pack
1
Set the POWER switch to OFF (CHG).
2
Slide the battery pack out in the direction
of the arrow while pressing the BATT
(battery) release button down.
of the arrow while pressing the BATT
(battery) release button down.
b
Note
• If you do not use the battery pack for a long time, use
up the battery pack completely before storing it. See
page 129 about storage of the battery pack.
page 129 about storage of the battery pack.
To check the remaining battery – Battery
Info
Info
You can check the battery’s current charge level
and its current remaining recording time both
during charging or when the power is turned off.
and its current remaining recording time both
during charging or when the power is turned off.
1
Set the POWER switch to OFF (CHG).
2
Open the LCD panel.
3
Press DSPL/BATT INFO.
The battery information appears for about 7
seconds.
Keep the button pressed to view it for about
20 seconds.
The battery information appears for about 7
seconds.
Keep the button pressed to view it for about
20 seconds.
A Battery charge level: Displays
approximate remaining amount of
power left in the battery pack.
power left in the battery pack.
B Approximate possible recording time
using the LCD panel.
C Approximate possible recording time
using the viewfinder.
CHG
CHG (charge)
lamp
lamp
POWER switch
BATT (battery)
release button
release button
Battery pack
POWER switch
DSPL/BATT INFO
BATTERY INFO
50%
0%
100%
BATTERY CHARGE LEVEL
REC TIME AVAILABLE
LCD SCREEN
VIEWFINDER
:
:
76 min
90 min
,
continued