Sony DVP-F25 用户手册
62
Settings for the Sound
(AUDIO SETUP)
“AUDIO SETUP” allows you to set the sound
according to the playback and connection
conditions.
according to the playback and connection
conditions.
Select “AUDIO SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 58).
The default settings are underlined.
Display. To use the display, see “Using the
Setup Display” (page 58).
The default settings are underlined.
◆ AUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to “ON.” The player reduces the audio
output level.
This function affects the output of the
AUDIO OUT L/R jacks.
item to “ON.” The player reduces the audio
output level.
This function affects the output of the
AUDIO OUT L/R jacks.
◆ AUDIO DRC (Dynamic Range Control)
(DVD only)
(DVD only)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to “AUDIO DRC.” This affects the
output from the following jacks:
– AUDIO OUT L/R jacks
– DIGITAL OUT (OPTICAL) jack only when
turned down when playing a DVD that
conforms to “AUDIO DRC.” This affects the
output from the following jacks:
– AUDIO OUT L/R jacks
– DIGITAL OUT (OPTICAL) jack only when
“DOLBY DIGITAL” is set to “D-PCM”
(page 63).
(page 63).
◆ DOWNMIX (DVD only)
Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see “Checking the
audio signal format” (page 45). This function
affects the output of the following jacks:
– AUDIO OUT L/R jacks
– DIGITAL OUT (OPTICAL) jack when
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see “Checking the
audio signal format” (page 45). This function
affects the output of the following jacks:
– AUDIO OUT L/R jacks
– DIGITAL OUT (OPTICAL) jack when
“DOLBY DIGITAL” is set to “D-PCM”
(page 63).
(page 63).
◆ DIGITAL OUT
Selects if audio signals are output via the
DIGITAL OUT (OPTICAL) jack.
DIGITAL OUT (OPTICAL) jack.
OFF
Normally, select this position.
ON
Select this when the playback sound
from the speakers is distorted.
from the speakers is distorted.
STANDARD
Normally select this position.
TV MODE
Makes the low sounds clear
even if you turn the volume
down.
even if you turn the volume
down.
WIDE
RANGE
RANGE
Gives you the feeling of being
at a live performance.
at a live performance.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
DOLBY DIGITAL:
DTS:
DTS:
D-PCM
OFF
DOLBY
SUR-
ROUND
SUR-
ROUND
Select this when the player is
connected to an audio
component that conforms to
Dolby Surround (Pro Logic).
connected to an audio
component that conforms to
Dolby Surround (Pro Logic).
NORMAL
Select this when the player is
connected to an audio
component that does not
conform to Dolby Surround (Pro
Logic).
connected to an audio
component that does not
conform to Dolby Surround (Pro
Logic).
ON
Normally select this position. When
you select “ON,” see “Setting the
digital output signal” for further
settings.
you select “ON,” see “Setting the
digital output signal” for further
settings.
OFF
The influence of the digital circuit
upon the analog circuit is minimal.
upon the analog circuit is minimal.