Sony fd trinitron kv-29ls30u 用户手册
21
GB
Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
Additional Information
Problem
No picture (screen is dark) and no
sound.
sound.
Poor or no picture (screen is dark),
but good sound.
but good sound.
No picture or no menu information
from equipment connected to the
Scart connector.
from equipment connected to the
Scart connector.
Good picture, no sound.
No colour on colour programmes.
Distorted picture when changing
programmes or selecting teletext.
programmes or selecting teletext.
Picture slanted
Noisy picture when viewing a TV
channel.
channel.
No unscrambling or unstable picture
whilst viewing a scrambling channel
with a decoder connected through
the Scart connector
whilst viewing a scrambling channel
with a decoder connected through
the Scart connector
:2/q
.
Remote control does not function.
The standby indicator
on the TV
flashes.
Solution
• Check the aerial connection.
• Plug the TV in and press the
• Plug the TV in and press the
button on the front of
the TV.
• If the standby indicator
• If the standby indicator
is on, press
button on
the remote control.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to the
factory settings.
• Check that the optional equipment is on and press the
button repeatedly on the remote control until the
correct input symbol is displayed on the screen.
• Press the
+/- button on the remote control.
• Check that “TV Speakers” is “On” on the “Sound
Adjustment” menu.
• Check that headphones are not connected.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to
factory settings.
factory settings.
• Turn off any equipment connected to the Scart
connector on the rear of the TV.
connector on the rear of the TV.
• Using the menu system, select the “Picture Rotation”
option in the “Detail Set Up” menu to correct the
picture slant.
option in the “Detail Set Up” menu to correct the
picture slant.
• Using the menu system, select the “Manual
Programme Preset” menu and adjust Fine Tuning
(AFT) to obtain better picture reception.
• Using the menu system, select the “Noise Reduction”
option in the “Detail Set Up” menu and select
“Auto” to reduce the noise in the picture.
• Using the menu system, select the “Noise Reduction”
option in the “Detail Set Up” menu and select
“Auto” to reduce the noise in the picture.
• Using the menu system, select the “Set Up” menu.
Then enter to “Detail Set Up” option and set “AV2
Output” to “TV”.
Output” to “TV”.
• Replace the batteries.
• Contact your nearest Sony service centre.
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
03GBKV29LS30U.fm Page 21 Friday, May 11, 2001 4:10 PM