Sony HTCT260H 用户手册

29

GB

 Check that the BLUETOOTH 

connection is made properly 
between this system and the 
BLUETOOTH device.

 Pair this system and the 

BLUETOOTH device again.

Sound skips or the correspondence 
distance is short.
 If a device that generates 

electromagnetic radiation, such as a 
Wi-Fi network, other BLUETOOTH 
device(s), or a microwave oven is 
nearby, move this system away 
from such sources.

 Remove any obstacle between this 

system and the BLUETOOTH device, 
or move this system away from the 
obstacle.

 Locate this system and the 

BLUETOOTH device as near as 
possible.

 Re-position this system.

 Re-position the BLUETOOTH device.

 Change the Wi-Fi frequency of the 

Wi-Fi router, computer, etc., to 
5 GHz  band.

Pairing cannot be done.
 Bring this system and the 

BLUETOOTH device closer together.

The sound is not in sync with the 
image.
 When you are watching movies, you 

may hear the sound with a slight 
delay from the image.

The BLUETOOTH connection cannot 
be completed.
 Make sure the BLUETOOTH device 

to be connected is turned on and 
the BLUETOOTH function is 
enabled.

 The BLUETOOTH connection has 

become disconnected. Make the 
BLUETOOTH connection again.

BLUETOOTH devices cannot be 
operated on the remote control of 
the system.
 Operate the BLUETOOTH device on 

itself.

Wireless transmission is not 
activated or there is no sound from 
the subwoofer.
 Check the status of the  

indicator on the subwoofer.

 Is off:

 Check that the AC power cord 

(mains lead) of the subwoofer is 
connected securely.

 Turn on the subwoofer by 

pressing 

 on the subwoofer.

 Flashes in red:

 Press  to turn off the 

subwoofer, and check that 
nothing is blocking the 
ventilation holes of the 
subwoofer.

 Flashes in green slowly or is lit in 

red:

 Move the subwoofer so that the 

 indicator lights up in green.

 Link the system (page 27).

 Flashes in green quickly:

 Consult your nearest Sony 

dealer.

Sound skips or has noise.
 If a device that generates 

electromagnetic radiation, such as a 
Wi-Fi network, or a microwave oven 
is nearby, move this system away 
from such sources.

 Remove any obstacle between the 

Sound Bar and the subwoofer, or 
move this system away from the 
obstacle.

 Locate the Sound Bar and the 

subwoofer as near as possible.

 Change the Wi-Fi frequency of the 

Wi-Fi router, computer, etc., to 
5 GHz  band.

continued