Sony HDR-TD10E 用户手册

下载
页码 72
GB
About care and storage of the lens
Wipe the surface of the lens clean with a soft 
cloth in the following instances:
When there are fingerprints on the lens 
surface
In hot or humid locations
When the lens is exposed to salty air such as 
at the seaside
It is recommended that you use [Auto 3D Lens 
Adjust] after wiping the lens. 
Store in a well-ventilated location subject to 
little dirt or dust.
To prevent mold, periodically clean the lens as 
described above.
On charging the pre-installed 
rechargeable battery
Your camcorder has a pre-installed rechargeable 
battery to retain the date, time, and other settings 
even when the camcorder is turned off. The pre-
installed rechargeable battery is always charged 
while your camcorder is connected to the wall 
outlet (wall socket) via the AC Adaptor or while 
the battery pack is attached. The rechargeable 
battery will be fully discharged in about 3 months 
if you do not use your camcorder at all. Use 
your camcorder after charging the pre-installed 
rechargeable battery. However, even if the pre-
installed rechargeable battery is not charged, the 
camcorder operation will not be affected as long 
as you are not recording the date.
Procedures
Connect your camcorder to a wall outlet (wall 
socket) using the supplied AC Adaptor, and leave 
it with the LCD screen closed for more than 24 
hours.
Note on disposal/transfer of the 
camcorder
Even if you delete all movies and still images, or 
perform [Format], data on the internal recording 
media may not be completely erased.
When you transfer the camcorder, it is 
recommended that you perform [Empty] 

(See “Getting detailed information from the 
“Handycam” Handbook” on page 54.) to prevent 
the recovery of your data. Also, when you dispose 
of the camcorder, it is recommended that you 
destroy the actual body of the camcorder.
Note on disposal/transfer of memory 
card
Even if you delete data in the memory card or 
format the memory card on your camcorder or 
a computer, you may not delete data from the 
memory card completely. When you give the 
memory card to somebody, it is recommended 
that you delete data completely using data 
deletion software on a computer. Also, when you 
dispose of the memory card, it is recommended 
that you destroy the actual body of the memory 
card.
To change the battery of the Wireless 
Remote Commander
 While pressing on the tab, inset your fingernail 
into the slit to pull out the battery case.
 Place a new battery with the + side facing up.
 Insert the battery case back into the Wireless 
Remote Commander until it clicks.
WARNING
Battery may explode if mistreated. Do not 
recharge, disassemble or dispose of in fire.
When the lithium battery becomes weak, the 
operating distance of the Wireless Remote 
Commander may shorten, or the Wireless 
Remote Commander may not function 
properly. In this case, replace the battery with 
a Sony CR2025 lithium battery. Use of another 
battery may present a risk of fire or explosion.
Tab