Sony HTSS370 用户手册

下载
页码 76
70
GB
S-AIR function
S-AIR connection is not established 
(sound transmission is not 
established), e.g., the indicator of the 
S-AIR sub unit turns off, flashes, or 
turns red. 
• If you use another S-AIR main unit, place 
it more than 8 meters away from this 
 
S-AIR main unit.
• Confirm the S-AIR IDs of the S-AIR main 
unit and S-AIR sub unit (page 50).
• Another S-AIR sub unit is paired to the
 
S-AIR main unit. Pair the desired S-AIR 
sub unit with the S-AIR main unit (page 
51).
• The S-AIR main unit is paired to another 
S-AIR sub unit. Cancel pairing.
• Place the S-AIR main unit and S-AIR sub 
unit separately from other wireless 
devices.
• Avoid using any other wireless devices.
• The S-AIR sub unit is turned off. Make 
sure the AC power cord (mains lead) is 
connected and turn on the S-AIR sub unit.
No sound is heard from the S-AIR 
product.
• If you use another S-AIR main unit, place 
it more than 8 meters away from this 
 
S-AIR main unit.
• Confirm the S-AIR IDs of the S-AIR main 
unit and S-AIR sub unit (page 50).
• Confirm the pairing setting (page 51).
• Place the S-AIR main unit and S-AIR sub 
unit closer to each other.
• Avoid using the equipment that generates 
electromagnetic energy, such as a 
microwave oven.
• Place the S-AIR main unit and S-AIR sub 
unit separately from other wireless 
devices.
• Avoid using any other wireless devices.
• Change the “RF CHANGE” setting (page 
• Change the S-AIR ID settings of the 
 
S-AIR main unit and S-AIR sub unit.
• Turn off the receiver and S-AIR sub unit, 
then turn on again.
• Check that headphones are not connected 
to the S-AIR sub unit.
There is noise or the sound skips.
• If you use another S-AIR main unit, place 
it more than 8 meters away from this 
 
S-AIR main unit.
• Sources with copyright protection may not 
be playable on S-AIR sub unit.
• Place the S-AIR main unit and S-AIR sub 
unit closer to each other.
• Avoid using the equipment that generates 
electromagnetic energy, such as a 
microwave oven.
• Place the S-AIR main unit and S-AIR sub 
unit separately from other wireless 
devices.
• Avoid using any other wireless devices.
• Change the “RF CHANGE” setting (page 
• Change the S-AIR ID settings of the
 
S-AIR main unit and S-AIR sub unit.
“HP NO LINK” and “VOLUME MIN” 
appear alternately in the display and 
the volume of the receiver becomes 
minimum.
• Volume becomes minimum when you turn 
off the surround amplifier with 
headphones connected or if the radio 
reception is poor. Check the radio 
reception and adjust the volume level to 
restore the sound from the headphones.