Sony HT-SF1300 用户手册

Be sure to change the factory setting of the 
DVD input button on the remote so that you 
can use the button to control your DVD player. 
For details, see “Changing button 
assignments” (page 61).

• You cannot do recording on the DVD recorder or 

VCR via this receiver. For details, refer to the 
operating instructions supplied with the DVD 
recorder or VCR.

• To input multi channel digital audio from the DVD 

player, set the digital audio output setting on the 
DVD player. Refer to the operating instructions 
supplied with the DVD player.

• To output sound from the front speakers and the 

subwoofer only when you select DVD input, be 
sure to:
– connect your DVD player to the DVD COAX IN 

jack on the receiver.

– press 2CH.

• Be sure to connect the video output of the DVD 

player, DVD recorder and VCR to the TV, so that 
the image is displayed on the TV. Refer to the 
operating instructions of each component 
connected for details.

• When connecting optical digital cords, insert the 

plugs straight in until they click into place.

• Do not bend or tie optical digital cords.

• All the digital audio jacks are compatible with

 

32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling 
frequencies

• To output the sound of the TV from the speakers 

connected to the receiver, be sure to:

– connect the audio output jacks of the TV to the 

TV AUDIO IN jacks of the receiver.

– turn off TV’s volume or activate the TV’s 

muting function.