Sony HVR-M15U 用户手册
Chapter 2
Playback and Recording
35
Chapter 2 Playback and Recording
6
If INPUT SELECT switch is set to S VIDEO or
VIDEO, select the audio mode. (With a HDV/DV
connection, skip step 6, 7, and 8.)
VIDEO, select the audio mode. (With a HDV/DV
connection, skip step 6, 7, and 8.)
When you select S VIDEO or VIDEO with INPUT
SELECT switch, set AUDIO mode by setting
[AUDIO MODE] in [AUDIO SET] menu (page
50).
SELECT switch, set AUDIO mode by setting
[AUDIO MODE] in [AUDIO SET] menu (page
50).
FS32K : Switches the audio mode to 4-channel
mode.
FS48K : Switches the audio mode to 2-channel
mode.
When recording a tape in DV (SP), you can set
AUDIO LOCK mode with [AUDIO LOCK] in
[AUDIO SET] menu (page 51).
AUDIO LOCK mode with [AUDIO LOCK] in
[AUDIO SET] menu (page 51).
Note
When signals are input from HDV/DV jack, those
signals input to the recorder with the audio mode are
the same as the signals input from the unit with the
audio mode.
signals input to the recorder with the audio mode are
the same as the signals input from the unit with the
audio mode.
7
Select the recording level adjustment mode using
[AUDIO AGC] in [AUDIO SET] menu.
Notes
• You cannot adjust recording level if you record
signals input via HDV/DV jack.
• For connecting the unit to a device that does not have
an i.LINK jack, the sound is recorded on CH1/2 when
the audio mode is set to [FS32K] (4-channel mode).
the audio mode is set to [FS32K] (4-channel mode).
8
Adjust the audio recording level with [AUDIO
REC LV] in [AUDIO SET] menu, if necessary
(page 50).
REC LV] in [AUDIO SET] menu, if necessary
(page 50).
You can adjust [AUDIO REC LV] only when you
have selected [OFF] in step 7.
Make sure not to exceed 0 dB at maximum
volume, or sound distortion occurs.
have selected [OFF] in step 7.
Make sure not to exceed 0 dB at maximum
volume, or sound distortion occurs.
Notes
• To record in DVCAM and DV (SP) format, there are
two audio modes which you can select, with either 2-
channels at FS48K or 4-channels at FS32K. It is not
possible to select other modes (for example with 2-
channels at FS32K).
channels at FS48K or 4-channels at FS32K. It is not
possible to select other modes (for example with 2-
channels at FS32K).
• During recording, you cannot change the audio mode.
• If you intend to dub audio after recording, select
whether [DVCAM] or [DV SP] of [
REC MODE]
in [IN/OUT REC] menu according to the unit you
will use for audio dubbing. Then, set [AUDIO
MODE] in [AUDIO SET] menu to [FS32K] (4-
channel mode) before recording (page 50). (The unit
does not have an audio dubbing function.)
will use for audio dubbing. Then, set [AUDIO
MODE] in [AUDIO SET] menu to [FS32K] (4-
channel mode) before recording (page 50). (The unit
does not have an audio dubbing function.)