Sony LBT-ZX80D 用户手册

• This function is only available for Sony TV series.

• If distance between the TV and this unit is too far, 

this function may not work. Install the unit near the 
TV.

• Keep the remote pointed in the direction of the TV 

until the TV is turned on and the input source is 
changed correctly.

Progressive is the method for displaying the TV 
images which reduces flickering and sharpens 
the image. To use this method, you need to 
connect to a TV that can accept progressive 
signals.
You can output video signals from 
COMPONENT VIDEO OUT jacks in 
INTERLACE or PROGRESSIVE format.

Each time you press the button, the display 
changes cyclically as follows:

P AUTO 

t

 P VIDEO 

t

 INTERLACE

x

Select this when your TV accepts progressive 
signals and the TV is connected to the 
COMPONENT VIDEO OUT jacks. The system 
automatically detects the software type and 
selects the appropriate conversion method.

x

Select this when your TV accepts progressive 
signals and the TV is connected to the 
COMPONENT VIDEO OUT jacks. 
The system fixes the conversion method to 
PROGRESSIVE VIDEO for video-based 
software.
Select this if the image is not clear when you 
select “P AUTO”.

x

Select this when your TV does not accept 
progressive signals or your TV is connected to 
the VIDEO OUT or S VIDEO OUT jack. 

The DVD VIDEO software can be divided into 
2 types:

• Film-based software

Film-based software is derived from film and 
displays the images at 24 frames per second.

• Video-based software

Video-based software is derived from TV, 
such as dramas and sitcoms and displays 
images at 30 frames or 60 fields per second.

Some DVD VIDEO contains both types of 
software. In order for these images to appear in 
your TV naturally when the video output is in 
progressive format, the progressive signals need 
to be converted to match your DVD VIDEO 
software.

• When you connect your TV to the COMPONENT 

VIDEO OUT jacks and play back video-based 
software in progressive signal format, some sections 
of the image may appear unnatural due to the 
conversion process.

• The image from VIDEO OUT and S VIDEO OUT 

jacks are always output in INTERLACE format even 
if you select “P AUTO” or “P VIDEO”.

• There would be no image on your TV or the image is 

not clear if your setting does not match your TV or 
connection.

• “PROGRESSIVE” lights up in the display when you 

select “P AUTO” or “P VIDEO”.