Sony MKS-2010 用户手册

Ch
ap
te

r 

6  
 A
d

v

a

nc
ed
 O
p

er

at

io

ns

115

Color Correction

Press [Secondary], turning it on.

Press the button for the color to adjust ([Blue], [Cyan], 
[Green], [Yellow], [Red], or [Magenta]), then adjust 
the following parameters.

To return secondary color correction parameters 
to their default settings
Press [Unity].

Press [Mask] in the Secondary menu, turning it on. The 
proceed as explained in “To mask part of the primary color 
correction” (see page 114).

You can make the following adjustments for RGB signals.
• Dark clip (lower limit of signal level)
• White clip (upper limit of signal level)

Display the RGB Clip menu, then proceed as follows.

Press [RGB Clip], turning it on.

Press [Dark] or [White], then set the following 
parameters.

To return RGB clip parameters to their default 
settings
Press [Unity].

You can divide the luminance levels of YUV signals into 
three regions (Dark, Middle, and Bright), and adjust the 
video signals of each region separately.

Display the Luminance Process menu, then proceed as 
follows.

Press [Lum Proc], turning it on.

Press [Mode].

A popup window appears so that you can select the 
adjustment mode.

Depending on what you want to adjust, press one of 
the following to select an adjustment mode.

1 (Lum)

Luminance

–100.00 to +100.00 

2 (Sat)

Saturation

0.00 to 200.00

3 (Hue 
Delay)

Hue delay

–180.00 to +180.00 

1 (Red)

Dark/white clip of R 
(red) signal

–50.00 to +150.00 

2 (Green)

Dark/white clip of G 
(green) signal

–50.00 to +150.00 

3 (Blue)

Dark/white clip of B 
(blue) signal

–50.00 to +150.00 

4 (All)

Dark/white clip R, G, 
and B signals 
(adjusted 
simultaneously)

Red value is 
shown

1

 Under Dark point

2

 Middle/Dark point

3

 Bright/Middle point

4

 Over Bright point

Dark region

Middle region

Bright region