Sony MKS-2010 用户手册

Cha

p

te

r 5

 Ba

si

c Op

er

a

tio

ns

51

Selecting Video

When the button pressed to select background video is lit in red, the video 
is displayed on the video monitor connected to the processor's program 
(final video) output connector.

Press a button in the background B row to select the background video after 
the transition.

The button lights in amber.

Select the background video before the transition by pressing a button in the 
PGM row. Select the background video after the transition by pressing a button 
in the PST row. Except for the [M/E] buttons at the right edge of the rows, the 
buttons have the same names and select the same signals as the buttons in the 
M/E cross-point control block.

To import video created in the M/E bank as background video into 
the PGM/PST bank
Press the [M/E] button at the right edge of either row (PGM row or PST row).

In the AUX bus control block, you can use the AUX delegation buttons to assign 
the cross-point button row to the desired bus, allowing you to select key signals 
and signals to apply a variety of other functions.
The buses which can be selected by the AUX delegation buttons are as follows.

For more information about the buttons in the AUX bus control block, see “AUX 
Bus Control Block” (page 15).

To select signals in the AUX bus control block, proceed as follows.

AUX1 to 4

AUX1 bus to AUX4 bus

EDIT PVW

Edit Pvw (edit preview) bus

UTIL

Utility bus

KEY1

[SRC BUS] button off: Key1 bus
[SRC BUS] button on: Key1 Source bus

KEY2

[SRC BUS] button off: Key2 bus
[SRC BUS] button on: Key2 Source bus

DSK1

[SRC BUS] button off: DSK1 (downstream key 1) bus 
[SRC BUS] button on: DSK1 Source (downstream key 1 source) bus

DSK2

[SRC BUS] button off: DSK2 (downstream key 2) bus
[SRC BUS] button on: DSK2 Source (downstream key 2 source) bus 

CCR1, 
CCR2

CCR1 (color correction1) bus, CCR2 bus

FRAME 
MEM

[SRC BUS] button off: Frame Memory Video bus
[SRC BUS] button on: Frame Memory Key bus