Sony NW- A608 用户手册

NW-A605 / A607 / A608.GB.2-661-269-11(1)

 

 

“USB Connect” does not 

appear when connected 

to the computer with the 

USB cable.

• The USB cable is not connected properly.

 Disconnect the USB cable, and then reconnect it.

• A USB hub is being used.

 Connecting the player via a USB hub may not 

work and is not supported. Connect the supplied 

USB cable directly to the computer.

• Please wait for the authentication of the CONNECT 

Player software.

• Another application is running on the computer.

 Disconnect the USB cable, wait a few minutes, 

and reconnect the cable. If the problem persists, 

disconnect the USB cable, restart the computer, 

and then reconnect the USB cable.

• The player USB connection (USB Bus Powered) is 

set to “High-Power500mA.”

 Set the “USB Bus Powered” to “Low-Power 

100mA” ( page 50).

• The installation of the CONNECT Player software 

was not successful.

 Disconnect the player from your computer, and 

reinstall the software using the supplied CD-ROM 

( “Quick Start Guide”). Audio tracks registered 

with the earlier installation will be available with 

the new CONNECT Player installation.

The player is not 

recognized by the 

computer when it is 

connected to the 

computer.

• The USB cable is not connected properly.

 Disconnect the USB cable, and then reconnect it.

• A USB hub is being used.

 Connecting the player via a USB hub may not 

work and is not supported. Connect the supplied 

USB cable directly to the computer.

• The installation of the CONNECT Player software 

was not successful.

 Disconnect the player from your computer, and 

reinstall the software using the supplied CD-ROM 

( “Quick Start Guide”). Audio tracks registered 

with the earlier installation will be available with 

the new CONNECT Player installation.

Connection with the computer/CONNECT Player 

(continued)

