Sony NSR-1000 用户手册

NSR-1000 Series v1.1.1 Release Note 

internal value not to over the limitation. (V11N:335) 

 
 

・ 

Regarding following cameras, if user use the VMD (Camera) with the codec as 
MPEG4, the frame rate is limited as 20FPS with NTSC or 16FPS with PAL. If 
VMD (Camera) is disabled after enabled, maximum frame rate setting becomes 
available after other resolutions are selected once. (VT1:2016) 

SNC-RZ50, SNC-CM120, SNC-CS50, SNC-CS20, SNC-DM160, SNC-DM110, 
SNC-DS60, SNC-DS10, SNC-DF85, SNC-DF80, SNC-DF50, SNC-RX570, 
SNC-RX550, SNC-RX530 

 

・ 

When you configure masks for a camera which is now recording images, the 
mask area shifts as expected for the live images, however, recording continues 
with the original mask setting at the beginning of recording. To enable the 
mask function in recording, be sure to deselect the [Enable] check box to enable 
the schedule on the Record dialog box, and then select it to apply. (VT3:830) 

 

・ 

When you do the Automatic Alarm Schedule Configuration, schedule is 
configured with the setting in [Video] tab. (VT1:2068) 

 

・ 

Note that some cameras do not support the camera direct panning/tilting 
function and area zoom function. If you use the encoder together with the 
cameras, check the manual to see if the cameras to be used support the above 
functions. (VT2:776) 

 

・ 

There are some restrictions when H.264 is selected for the cameras below: 

SNC-CS50, SNC-DF50, SNC-DF80, SNC-DF85,   
SNC-RX530, SNC-RX550, SNC-RX570, SNC-RZ50 

 

・ 

Another codec cannot be selected at the same time. 

・ 

VMD(Camera) and VMF function does not work despite those settings are 

available in the [VMD] tab of the configuration screen. Please use the 
VMD(Recorder) when H.264 is selected. 

- 12 -