Sony rdr-gx380 用户手册
16
Step 3: Connecting the Audio Cords/HDMI Cord
Select one of the following patterns, A or B, according to the input jack on your TV monitor, projector,
or audio component such as an AV amplifier (receiver). This will enable you to listen to sound.
or audio component such as an AV amplifier (receiver). This will enable you to listen to sound.
A
Digital audio input jack
If your audio component has a Dolby
*1
Digital,
DTS
*2
, or MPEG audio decoder and a digital
input jack, use this connection. You can enjoy
Dolby Digital (5.1ch), DTS (5.1ch), and MPEG
audio (5.1ch) surround effects.
Dolby Digital (5.1ch), DTS (5.1ch), and MPEG
audio (5.1ch) surround effects.
B
Audio L/R (left/right) input jacks
This connection will use your TV’s or audio
component’s two speakers for sound.
component’s two speakers for sound.
z
Hint
For correct speaker location, refer to the operating
instructions supplied with the connected components.
instructions supplied with the connected components.
AUDIO
INPUT
L
R
B
A
HDMI OUT
COAXIAL
PCM/DTS/
MPEG/
DOLBY DIGITAL
MPEG/
DOLBY DIGITAL
DIGITAL OUT
Audio component with
a decoder
a decoder
(white)
TV, projector, or
audio component
audio component
Audio cord (not
supplied)
supplied)
: Signal flow
Coaxial digital
cord (not supplied)
cord (not supplied)
to DIGITAL OUT (COAXIAL)
to AUDIO OUT (L/R)
Rear (L)
DVD recorder
(red)
(white)
(red)
[Speakers]
Front (L)
[Speakers]
to coaxial/HDMI digital input
Rear (R)
Front (R)
Subwoofer
Centre
HDMI cord
(not supplied)
(not supplied)
to HDMI OUT
or