Sony rht-g800 用户手册
9
GB
Getting
Star
ted
Installing the top glass panel
Refer to “How to install the top glass panel”
supplied with this stand.
supplied with this stand.
Preventing the TV from
toppling over
toppling over
As a protective measure, secure the TV.
Perform following steps as a protective measure
if you have a Sony LCD TV.
Perform following steps as a protective measure
if you have a Sony LCD TV.
1
Place the TV on the center of the stand.
Install the TV so that the TV does not hide
the front display of the stand.
the front display of the stand.
2
Fasten the support belt* to the stand
with the screw*.
with the screw*.
3
Fit the support belt* to the stand, then
firmly fasten with the screw* using a
screw driver or coin, etc.
firmly fasten with the screw* using a
screw driver or coin, etc.
4
While supporting the TV, tighten the
support belt* to secure in place.
support belt* to secure in place.
* The support belt, screws are supplied with the LCD
color TV.
Installing the shelf board
1
Insert the attaching screw (supplied)
into the hole in the stand.
into the hole in the stand.
2
Fit the shelf board over the screw
horizontally. This requires two or more
people.
horizontally. This requires two or more
people.
Bundling the cables
1
Connect the components to the stand.
2
Bundle the cables with the cord
manager to prevent them from tangling.
manager to prevent them from tangling.
Stuff the cables into the cord manager as
shown in the illustration below.
shown in the illustration below.
• Be careful not to pinch your fingers when setting up
the stand.
Setting this stand
Note
continued