Sony slv-d910b 用户手册
55
Recording TV programmes using DIAL TIMER (SLV-D950B only)
B
a
sic
O
p
p
er
at
at
ions
To set the clock
Tips
• To cancel a Dial Timer setting, press any button other than
DIAL TIMER or
PROGRAM +/– on the unit or any button on the remote while you are making the setting.
• To check, change, or cancel the programme setting, see “Checking/changing/cancelling timer
Notes
• If six programmes have already been set using the ShowView system or the manual timer
setting, “FULL” appears in the display window for about five seconds.
• If you set the clock using the Auto Clock Set feature, the clock will adjust itself to the
incoming time signal regardless of adjustments made with DIAL TIMER. Be sure you have
set Auto Clock Set correctly.
set Auto Clock Set correctly.
• If you are setting the clock for the first time or “0:– –” appears in the display window, you
cannot set the clock to February 29
th
using DIAL TIMER. Please use the Auto Clock Set
feature to set the VCR to this day.
• The timer
indicator flashes in the display window when you complete the setting in step 11
on page 54 with no tape inserted.
• When the setting time is incorrect, “Error” appears in the display window in step 11. Set the
timer again from step 1.
About the Demonstration Mode
The Dial Timer function has a Demonstration Mode that allows the user, such as a
salesperson, to enter more than six examples of timer settings when demonstrating
the use of DIAL TIMER. It cancels the FULL notice which appears if six
programmes have already been set. Do not use the Demonstration Mode for making
timer recordings. Doing so may cause the settings to be inaccurate.
salesperson, to enter more than six examples of timer settings when demonstrating
the use of DIAL TIMER. It cancels the FULL notice which appears if six
programmes have already been set. Do not use the Demonstration Mode for making
timer recordings. Doing so may cause the settings to be inaccurate.
To activate the Demonstration Mode
Press X on the unit while turning
DIAL TIMER. “DEMO” appears in the display
window for a few seconds.
To cancel the Demonstration Mode
Turn the power off and unplug the mains lead. Although the Demonstration Mode is
cancelled, the timer settings entered while using the Demonstration Mode will
remain. Be sure to manually cancel the timer settings before you use DIAL TIMER
or any other timer method after reconnecting the mains lead (page 56).
cancelled, the timer settings entered while using the Demonstration Mode will
remain. Be sure to manually cancel the timer settings before you use DIAL TIMER
or any other timer method after reconnecting the mains lead (page 56).
1
Hold down
DIAL TIMER so that DAY indicator appears in the display
window. However, if the clock has already been set, the current setting appears.
2
Turn
DIAL TIMER to set the day.
3
Press
DIAL
TIMER.
MONTH indicator appears in the display window.
4
Turn and press
DIAL TIMER to set the month and then the year.
After you set the year, “CLOCK” appears in the display window.
5
Turn and press
DIAL TIMER to set the hour and minute.
6
When you have finished setting the time, press
DIAL TIMER to start the
clock.