Sony N71 用户手册
86
Searching for a selected point on the tape
filename[010addo.fm] model name1[SLV-N81] model name2[SLV-N71]
[3-065-551-11 (1)]
To cancel searching
Press H PLAY or x STOP.
To turn off the bar indication
Press DISPLAY again.
Notes
• The figure on the bar indication represents the total time length of the inserted tape as shown
below.
The total time length may not be displayed correctly for:
– Tapes other than T-60, T-120, or T-160.
– Tapes recorded in more than one tape speed mode.
The total time length may not be displayed correctly for:
– Tapes other than T-60, T-120, or T-160.
– Tapes recorded in more than one tape speed mode.
• If you move the pointer (V) on the bar indication while searching, the VCR searches for the
new reset point.
• With the bar indication on, the M FF/
, and m REW/ < buttons on the remote
commander work only for moving the pointer (V) and are not used for normal tape operation.
The M FF and m REW buttons on the VCR are used for normal tape operation. Note,
however, if you press these buttons on the VCR, searching is canceled.
The M FF and m REW buttons on the VCR are used for normal tape operation. Note,
however, if you press these buttons on the VCR, searching is canceled.
Tape type
Total time length
SP
LP
EP
T-60 or shorter
60
120
180
from T-80 to T-140
120
240
360
T-160 or longer
160
320
480