Sony STR-DE497 用户手册

masterpage:Right

lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB04BSC_STR-DE497-

CEL.fm]

 model name1[STR-DE497]

[4-252-084-13(1)]

A SW: Lights up when sub woofer selection is 

set to “YES” (page 18) and audio signal is 
output from the SUB WOOFER jack.

B LFE: Lights up when the disc being played 

back contains the LFE (Low Frequency 
Effect) channel and the LFE channel signal is 
actually being reproduced.

C SP A/SP B: Lights up in accordance with the 

speaker system being used (A or B). Turns off 
when speaker output is turned off or when 
headphones are connected.

D ; DIGITAL: Lights up when the receiver is 

decoding signals recorded in the Dolby Digital 
format.

E ; PRO LOGIC II: “; PRO LOGIC” lights 

up when the receiver applies Pro Logic 
processing to 2 channel signals in order to 
output the center and surround channel 
signals. “; PRO LOGIC II” lights up when 
the Pro Logic II Movie/Music decoder is 
activated. However, both indicators do not 
light up if both the center and surround 
speakers are set to “NO” and “A.F.D. AUTO”, 
“DOLBY PL”, “PLII MOV” or “PLII MUS” 
is selected.

Dolby Pro Logic and Dolby Pro Logic II 
decoding do not function for DTS format signals.

F DTS: Lights up when DTS signals are input.

When playing a DTS format disc, be sure that you 
have made digital connections and that INPUT 
MODE is not set to “ANALOG” (page 31).

G Tuner indicators: Lights up when using the 

receiver to tune in radio stations, etc. See 
pages 22–25 for tuner operations.

“RDS” appears for models of area code CEL, 
CEK only.

H D.RANGE: Lights up when dynamic range 

compression is activated (page 32).

I COAX: Lights up when the source signal is a 

digital signal being input through the 
COAXIAL terminal.

J OPT: Lights up when the source signal is a 

digital signal being input through the 
OPTICAL terminal.

K SLEEP: Lights up when sleep timer is 

activated.

L Playback channel indicators: The letters 

(L, C, R, etc.) indicate the channels being 
played back. The boxes around the letters vary 
to show how the receiver downmixes the 
source sound (based on the speakers settings).

L (Front Left), R (Front Right), C (Center 
(monaural)), SL (Surround Left), SR 
(Surround Right), S (Surround (monaural or 
the surround components obtained by Pro 
Logic processing))

Recording format (Front /Surround): 3/2

Output channel: Surround speakers absent

Sound Field: A.F.D. AUTO

;

;

9

8

qs

0

qa

2

1

4

3

5

6

7

GB01COV_STR-DE497-CEL.book  Page 27  Friday, July 16, 2004  2:34 PM