Sony STR-DE695 用户手册

STR-DE695 4-244-559-11 (1)GB

Once you have hooked up the speakers and
turned on the power, clear the receiver’s
memory. Then specify the speaker parameters
(size, position, etc.) and perform any other
initial setup operations necessary for your
system.

To check the audio output during settings (to set up
while outputting the sound), check the connection
(page 22).

Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.

Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears in the
display alternatingly.

After “CLEARING” appears in the display
for a while, “CLEARED” appears.
The following are reset to their factory
settings.

• All settings in the SET UP, CUSTOM,

LEVEL and EQ menus.

• The sound field memorized for each

input selector and preset station.

• All sound field parameters.
• All preset stations.
• All index names for input selector and

preset stations.

• The master volume is set to

“VOL MIN”.

°

°

°

A

A

B

C

C

D

Before using your receiver for the first time,
adjust SET UP parameters so that the receiver
correspond to your system. For the adjustable
parameters, see the table on page 62. See pages
17–22 for speaker settings and page 41 for
other settings.

For the best possible surround sound, all
speakers should be the same distance from the
listening position (A).

However, the receiver lets you place the center
speaker up to 1.5 meters closer (B), the
surround speakers up to 4.5 meters closer (C)
and the surround back speaker up to 4.5 meters
closer (D) to the listening position.

The front speakers can be placed from 1.0 to
7.0 meters from the listening position (A).

You can place the surround speakers either
behind you or to the side, depending on the
shape of your room (etc.).

When placing surround speakers to your side

(long room)