Sony STR-DE695 用户手册
Operations Using the Remote RM-U307
STR-DE695 4-244-559-11 (1)GB
55
GB
To change the factory settings of
VIDEO 3 and AUX buttons
1
Hold down FN SHIFT and the INPUT
SELECTOR button you want to change
(for example, VIDEO 3 or AUX).
SELECTOR button you want to change
(for example, VIDEO 3 or AUX).
2
Press the corresponding button of the
component you want to assign to the
INPUT SELECTOR button.
component you want to assign to the
INPUT SELECTOR button.
To reset a button to its factory
setting
Repeat the above procedure.
To reset all the INPUT SELECTOR
buttons to their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at
the same time.
the same time.
Changing the factory
setting of an INPUT
SELECTOR button
setting of an INPUT
SELECTOR button
If the factory settings of the INPUT
SELECTOR buttons do not match your system
components, you can change them. For
example, if you have an MD deck and a tape
deck and you don’t have a CD player, you can
assign the CD/SACD button to your tape deck.
SELECTOR buttons do not match your system
components, you can change them. For
example, if you have an MD deck and a tape
deck and you don’t have a CD player, you can
assign the CD/SACD button to your tape deck.
Note that the settings of the TUNER button
cannot be changed.
cannot be changed.
1
Hold down the INPUT SELECTOR button
whose input source you want to change
(for example, CD/SACD).
whose input source you want to change
(for example, CD/SACD).
2
Press the corresponding button of the
component you want to assign to the
INPUT SELECTOR button (for example,
4 – Tape deck).
component you want to assign to the
INPUT SELECTOR button (for example,
4 – Tape deck).
The following buttons are assigned to select
the input source:
the input source:
To operate
Press
CD player
4
MD deck
5
Tape deck A
6
Tape deck B
7
LD player
8
VCR (command mode VTR 1*)
9
VCR (command mode VTR 2*)
0
VCR (command mode VTR 3*)
>10
TV
ENTER
DSS (Digital Satellite Receiver)
.
DVD
>
* Sony VCRs are operated with a VTR 1, 2 or 3
setting. These correspond to Beta, 8mm and
VHS respectively.
VHS respectively.
Now you can use the CD/SACD button to
control the tape deck.
control the tape deck.