Sony STR-DA2100ES 用户手册
masterpage:Left
lename[E:\SEM_Janet\Revision
Data\J9050000_2580805131DA2100ES_US\2580805131\US070TH_STR-DA2100ES-U.fm]
46
US
model name1[STR-DA2100ES]
[2-580-805-13(1)]
You can select the front speaker system you
want to use.
want to use.
Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the front speaker
system you want to use.
repeatedly to select the front speaker
system you want to use.
The selected speaker system appears in the
display. To turn off the speaker output, press
SPEAKERS (OFF/A/B/A+B) repeatedly until
the “SP.A” and “SP.B” indicators in the display
turn off.
display. To turn off the speaker output, press
SPEAKERS (OFF/A/B/A+B) repeatedly until
the “SP.A” and “SP.B” indicators in the display
turn off.
The speaker system
• SP.A
The speakers connected to the SPEAKERS
FRONT A terminals.
FRONT A terminals.
• SP.B
The speakers connected to the SPEAKERS
FRONT B terminals.
FRONT B terminals.
• SP.A and SP.B
The speakers connected to both the
SPEAKERS FRONT A and B terminals
(parallel connection).
SPEAKERS FRONT A and B terminals
(parallel connection).
Before you begin, make sure you have
connected all components properly.
connected all components properly.
Recording on an audio tape or
MiniDisc
MiniDisc
You can record on a cassette tape or MiniDisc
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
1
Select the component to be recorded.
2
Prepare the component for playing.
For example, insert a CD into the CD
player.
player.
3
Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
recording deck and adjust the
recording level, if necessary.
4
Start recording on the recording deck,
then start playback on the playback
component.
then start playback on the playback
component.
Notes
• You cannot record a digital audio signal using a
component connected to the analog MD/TAPE OUT
jacks. To record a digital audio signal, connect a
digital component to the DIGITAL OPTICAL MD/
TAPE OUT jacks.
jacks. To record a digital audio signal, connect a
digital component to the DIGITAL OPTICAL MD/
TAPE OUT jacks.
• Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• The analog audio signals of the current input is
output from the MD/TAPE OUT jacks.
• The signals input to the MULTI CH IN jacks are not
output from the MD/TAPE OUT jacks even when
MULTI CH IN is being used. The analog audio
signals of the current or previously used input are
output.
MULTI CH IN is being used. The analog audio
signals of the current or previously used input are
output.
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the sources.
from the sources.
Selecting the speaker
system
system
Recording
US01COV_STR-DA2100ES-U.book Page 46 Wednesday, July 13, 2005 2:17 PM