Sony STR-DA3200ES 用户手册

V/v repeatedly to select 

V/v repeatedly to select 

V/v repeatedly to select 

Measurement starts in five seconds. A 
countdown appears on the TV screen.
While the time is counting down, stand 
away from the measurement area to 
avoid measurement error.

The measurement process will take 
approximately 30 seconds. Wait until the 
measurement process completes.

You cannot measure the speaker height of the 
surround speakers and the surround back speakers. 
Set this value from “SP POSI.” settings in the 
Speaker Settings menu (page 71).

• Operations other than turning the receiver on or off 

and pressing ON SCREEN to turn the display on or 
off are deactivated during auto calibration.

• In the following situations, the measurements may 

not be performed correctly or auto calibration 
cannot be performed.
– when special speakers, such as dipole speakers 

are used.

– when the multi zone function is used in zone 2.

Auto calibration is cancelled when you change 
the volume, switch functions, change the 
speaker setting of the receiver, or connect 
headphones.

ENGINEER

Sets the frequency 
characteristics to a set that 
matches that of the Sony 
listening room standard.

FULL FLAT

Makes the measurement of 
frequency from each 
speaker flat.

FRONT REF

Adjusts the characteristics 
of all the speakers to match 
the characteristics of the 
front speaker.