Sony STR-DA3200ES 用户手册
42
GB
6
Press
V/v repeatedly to select
“4 ohm” or “8 ohm” depending
on the speakers you are using,
then press
on the speakers you are using,
then press
to enter the
selection.
7
Press MENU to exit the menu.
Notes
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
supplied with your speakers. (This information is
often on the back of the speaker.)
• When you connect all speakers with a nominal
impedance of 8 ohms or higher, set “SP.
IMPEDANCE” to “8 ohm.” When connecting
other types of speakers, set it to “4 ohm.”
IMPEDANCE” to “8 ohm.” When connecting
other types of speakers, set it to “4 ohm.”
• When you connect front speakers to both the
SPEAKER A and B terminals, connect the
speakers with a nominal impedance of 8 ohms or
higher.
– When you connect speakers with impedance of
speakers with a nominal impedance of 8 ohms or
higher.
– When you connect speakers with impedance of
16 ohms or higher in both “A” and “B”
configuration:
Set “SP. IMPEDANCE” to “8 ohm” in the
System Settings menu.
configuration:
Set “SP. IMPEDANCE” to “8 ohm” in the
System Settings menu.
– For other types of speakers in other
configurations:
Set “SP. IMPEDANCE” to “4 ohm” in the
System Settings menu.
Set “SP. IMPEDANCE” to “4 ohm” in the
System Settings menu.
You can select the front speakers you want to
drive.
drive.
Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the front
speaker system you want to drive.
repeatedly to select the front
speaker system you want to drive.
Note
You cannot switch the front speakers by pressing
SPEAKER (OFF/A/B/A+B) when the headphones
are connected to the receiver.
SPEAKER (OFF/A/B/A+B) when the headphones
are connected to the receiver.
Selecting the front speaker
SPEAKERS (OFF/A/B/A+B)
Set to
To select
A
The speakers connected to the
FRONT SPEAKERS A terminals.
FRONT SPEAKERS A terminals.
B
The speakers connected to the
FRONT SPEAKERS B terminals.
FRONT SPEAKERS B terminals.
A+B
The speakers connected to both the
FRONT SPEAKERS A and B
terminals (parallel connection).
FRONT SPEAKERS A and B
terminals (parallel connection).
OFF
No audio signals are output from
any speaker terminals, or the PRE
OUT terminal.
any speaker terminals, or the PRE
OUT terminal.