Sony STR-DV10 用户手册

masterpage:Right

lename[E:\SEM_Janet\Revision1_STR-

DV10\J9050000_2560573121_US\2560573121\US03CON_STR-DV10-U.fm]

 model name1[STR-DV10]

[2-560-573-12(1)]

Connect the AC power cord to a wall outlet.

• The AC OUTLET(s) on the rear of the receiver is a 

switched outlet, which supplies power to the 
connected component only while the receiver is 
turned on.

• Make sure that the total power consumption of the 

component(s) connected to the receiver’s AC 
OUTLET(s) does not exceed the wattage stated on 
the rear panel. Do not connect high-wattage 
electrical home appliances such as electric irons, 
fans, or TVs to this outlet. This may cause a 
malfunction.

Before using the receiver for the first time, 
initialize the receiver by performing the 
following procedure.
This procedure can also be used to return 
settings you have made to their factory defaults. 
Use the buttons on the receiver for the operation.

Press ?/1 to turn off the receiver.

Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears in the 
display alternatingly.

“CLEARING” appears in the display for a 
while, then “CLEARED” appears.
The following are reset to their factory 
settings.
• All settings in the SET UP, LEVEL, EQ 

and CUSTOMIZE menus.

• The sound field memorized for each 

input and preset station.

• All sound field parameters.
• All preset stations.
• All index names for inputs and preset 

stations.

• MASTER VOLUME –/+ is set to “VOL 

MIN”.

• Input is set to DVD.

FRONT B

b

To a wall 
outlet

AC power cord

US01COV_STR-DV10-U.book  Page 17  Monday, July 4, 2005  11:52 AM