Sony STR-DE375 用户手册
11
GB
Receiver Operations
1
Press one of the Function buttons to select the
component you want to use.
The Function buttons on the remote are factory-
set as follows:
component you want to use.
The Function buttons on the remote are factory-
set as follows:
*
VIDEO 1, VIDEO 2, VIDEO 3, PHONO and
MD/TAPE function is a 2- key operation. To select
the above function, press FN SHIFT (function shift)
and the function key you want simultaneously.
For example, press FN SHIFT and CD/SACD to
select MD/TAPE function.
MD/TAPE function is a 2- key operation. To select
the above function, press FN SHIFT (function shift)
and the function key you want simultaneously.
For example, press FN SHIFT and CD/SACD to
select MD/TAPE function.
If you want to change the factory setting of a
button, see the next section.
The receiver and the selected component turn on.
button, see the next section.
The receiver and the selected component turn on.
If the component does not turn on
Press the power switch on the component.
2
Start playing.
Refer to “Remote Button Descriptions” on page 25
for details.
Refer to “Remote Button Descriptions” on page 25
for details.
Changing the factory setting of a
function button
function button
If the factory settings of the FUNCTION buttons don’t
match your system components, you can change them.
For example, if you have an MD player and a tape deck
and you don’t have a CD player, you can assign the
CD/SACD button to your tape deck.
match your system components, you can change them.
For example, if you have an MD player and a tape deck
and you don’t have a CD player, you can assign the
CD/SACD button to your tape deck.
Note that the settings of the TUNER and FN SHIFT
functions (VIDEO 1, VIDEO 2, VIDEO 3, PHONO and
MD/TAPE) cannot be changed.
functions (VIDEO 1, VIDEO 2, VIDEO 3, PHONO and
MD/TAPE) cannot be changed.
1
Hold down the Function button whose function
you want to change (for example, CD/SACD).
you want to change (for example, CD/SACD).
2
Press the corresponding button of the component
you want to assign to the Function button (for
example, 4 – Tape deck).
you want to assign to the Function button (for
example, 4 – Tape deck).
To listen to or watch
Radio programs
Compact discs (CD)
MiniDisc (MD) or
Audio tapes
Audio tapes
TV programs or
Satellite receiver
Satellite receiver
VHS Video tapes
(VTR-3 mode)
(VTR-3 mode)
DVD player/
Dolby Digital decoder
with MULTI CH OUTPUT
Dolby Digital decoder
with MULTI CH OUTPUT
Press
TUNER
CD/SACD
MD/TAPE and FN SHIFT*
(INITIAL-MD MODE)
(INITIAL-MD MODE)
TV/SAT
(INITIAL-TV MODE)
(INITIAL-TV MODE)
VIDEO
DVD/LD
(INITIAL-DVD MODE)
(INITIAL-DVD MODE)
The following buttons are assigned to select the
functions:
functions:
*
Sony VCRs are operated with a VTR 1, 2 or 3 setting.
These correspond to Beta, 8mm and VHS respectively.
These correspond to Beta, 8mm and VHS respectively.
Now you can use the CD/SACD button to control
the tape deck.
the tape deck.
To reset a button to its factory setting
Repeat the above procedure.
To reset all the function buttons to their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at the same time.
Function
buttons
buttons
Numeric
buttons
buttons
?
/1
AV ?/1
MASTER VOL –
> 10
.
ENTER
To operate
CD player
DAT deck
MD deck
Tape deck A
Tape deck B
LD player
VCR (remote control mode VTR 1*)
VCR (remote control mode VTR 2*)
VCR (remote control mode VTR 3*)
TV
DSS (Digital Satellite System)
DVD
VCD player
Press
1
2
3
4
5
6
7
8
9
0
>10
ENTER
.