Manualsbrain.com
  1. 份说明书
  2. 个品牌
  3. Sony
  4. STR-DH710
  5. 用户手册

Sony STR-DH710 用户手册

下载
页码 共 100
91
GB
 
 
 
 
 
 
 
 
 
Ad
ditional Inf
o
rmation
There is no sound from digital sources 
(from COAXIAL or OPTICAL input jack).
• Check that the INPUT MODE is not set to 
• Check that the Analog Direct function is 
not selected.
• Check that the “A. ASSIGN” function is 
not used to reassign the audio input of 
another source to the selected input (page 
68).
• Set “ARC” to “ARC OFF” when no sound 
is output from TV OPTICAL IN jack 
during TV input (page 83).
The left and right sounds are 
unbalanced or reversed.
• Check that the speakers and components 
are connected correctly and securely.
• Adjust the level parameters using the 
LEVEL menu.
There is severe hum or noise.
• Check that the speakers and components 
are connected securely.
• Check that the connecting cords are away 
from a transformer or motor, and at least 
 
10 feet (3 meters) away from a TV set or 
fluorescent light.
• Move your audio components away from 
the TV.
• The plugs and jacks are dirty. Wipe them 
with a cloth slightly moistened with 
alcohol.
There is no sound, or only a very low-
level sound is heard from the center/
surround/surround back/front high 
speakers.
• Select a CINEMA STUDIO EX mode 
• Check that the speaker settings are 
appropriate using the AUTO CAL menu or 
“PATTERN” in the SPEAKER menu. 
Then check that sound is output from each 
speaker correctly, using “T. TONE”  in the 
LEVEL menu.
• Adjust the speaker level (page 40).
There is no sound from the subwoofer.
• Check that the subwoofer is connected 
correctly and securely.
• Make sure you have turned on your 
subwoofer.
• Depending on the selected sound field, no 
sound output from the subwoofer.
• When all speakers are set to “LARGE” 
and “NEO6 CIN” or “NEO6 MUS” is 
selected, there is no sound from the 
subwoofer.
• Check “PATTERN” setting (page 77).
The surround effect cannot be 
obtained.
• Make sure you have selected the sound 
• Sound fields do not function for signals 
with a sampling frequency of more than
 
48 kHz.
Dolby Digital or DTS multi channel 
sound is not reproduced.
• Check that the DVD, etc. you are playing 
is recorded in Dolby Digital or DTS 
format.
• When connecting the DVD player, etc., to 
the digital input jacks of this receiver, 
check the audio setting (the settings for the 
audio output) of the connected component.
Recording cannot be carried out.
• Check that the components are connected 
correctly.
• Select the source component using the 
continued