Sony wall-mount bracket su-wl500 用户手册
− −
Additional Information for Using Sony Wall-Mount Bracket (SU-WL500)
CAUTION
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV.
Refer to your TV’s operating instructions for its weight.
3
Install the Base Bracket on the wall.
Refer to the Instructions for SU-WL500.
4
Disconnect all the cables from the TV.
5
Secure the Mounting Hook to the rear of the TV.
Determine the screw locations and secure the Mounting Hooks to the rear of the TV. Refer to
the “Screw and Hook Locations Diagram/Table” shown below.
KDL-HX
*, KDL-32EX30*only
Screw
(+PSW6 × 16)
Square
hole
Mounting Hook
KDL-EX70
* only
Before installing,
remove screws
Square
hole
Screw
(+PSW6 × 16)
Mounting Hook