Sony xm-4026 用户手册

下载
页码 4
Sony Corporation 
1996
Printed in Japan
XM-5026/4026
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
75␣ (55)* watts per channel minimum continuous average power into
4␣ ohms, both channels driven from 20 Hz to 20 kHz with no more than
0.04% total harmonic distortion per Car Audio Ad Hoc Committee
standards.
Other Specifications
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. XM-5026  Serial No.
Model No. XM-4026  Serial No.
Features
•Rated power output of 50 (40)* watts per
channel (at 4 ohms, supply voltage at 12.5 V).
•Rated power outputs of 75 (55)* watts per
channel (at 4 ohms, supply voltage at 14.4 V).
•The XM-5026/4026 can be used as a monaural
amplifier with a maximum outputs of 440 (320)*
watts at 4 ohms (when used as a bridging
amplifier).
•Dual mode connection possible a multi-speaker
system.
•Protection circuit provided.
•Pulse power supply** for stable, regulated
output power.
•New circuit which removes the source
resistance from the final MOS FET output stage,
and drives the speaker directly.
* (XM-4026)
** Pulse power supply
This unit has a built-in power regulator which converts the
power supplied by the DC 12 V car battery into high speed
pulses using a semiconductor switch. These pulses are
stepped up by the built-in pulse transformer and separated
into both positive and negative power supplies before being
converted into direct current again. This is to regulate
fluctuating voltage from the car battery. This light weight
power supply system provides a highly efficient power
supply with a low impedance output.
Caractéristiques
•Sortie nominale de 50 (40)* watts par canal (à 4
ohms, tension d’alimentation de 12,5 V).
•Sorties nominale de 75 (55)* watts par canal (à 4
ohms, tension d’alimentation de à 14,4 V).
•Le XM-5026/4026 peut être utilisé comme
amplificateur monaural avec une puissance
maximum de 440 (320)* watts à 4 ohms (avec un
amplificateur en pont).
•Connexion double mode à plusieurs haut-
parleurs possible.
•Circuit de protection fourni.
•Alimentation par impulsions** pour une sortie
stable et régulée.
•Nouveau circuit qui élimine la résistance source
de l’étage de sortie final MOS FET et commande
directement le haut-parleur.
* (XM-4026)
** Alimentation par impulsions
Le convertisseur intégré de cet appareil permet de
transformer l’alimentation en courant continu fournie par
une batterie de voiture de 12 volts en signaux ultra-rapides
grâce à l’interrupteur à semiconducteur. Ces signaux
peuvent être démultipliés par le transformateur intégré à
impulsions, séparés en courant positif et négatif avant
d’être de nouveau convertis en courant continu afin de
stabiliser la tension variable de la batterie de voiture. Le
système d’alimentation de faible poids fournit une
alimentation très efficace avec une sortie de basse
impédance.
3-858-867-11 (1)
Stereo power
Amplifier
Operating Instructions
Mode d'emploi
This instruction manual covers the XM-5026 and XM-4026.  The
illustrations on the manual are of the XM-5026.  When differences occur,
they are clearly described in the corresponding sections.
Ce mode d’emploi couvre les modèles XM-5026 et XM-4026. Les
illustrations représentent le XM-5026. Toute différence est clairement
indiquée dans les paragraphes correspondants.
Spécifications
Circuiterie
Circuit OTL (Sortie sans
transformateur)
Alimentation par impulsions
Entrées
Prises à broche RCA
Sorties
Bornes de haut-parleurs
Impédance des haut-parleurs
1 – 8 ohms (stéréo)
2 – 8 ohms (utilisé comme
amplificateur en pont)
Sorties maximales
150 (110)* watts par canal (à 4
ohms)
220 (160)* watts par canal (à 2
ohms)
440 (320)* watts (monaural) à 4
ohms
Sorties nominales (tension d’alimentation de 12,5 V)
50 (40)* watts par canal (20 Hz –
20 kHz, 0,04 % THD, à 4 ohms)
75 (60)* watts par canal (20 Hz –
20 kHz, 0,1 % THD, à 2 ohms)
75 (65)* watts par canal (20 Hz –
20 kHz, 0,1 % THD, à 1 ohms)
150 (120)* watts (monaural) (20 Hz
– 20 kHz, 0,1 % THD, à 4 ohms)
Sorties nominales (tension d’alimentation de 14,4 V)
75 (55)* watts par canal (20 Hz –
20 kHz, 0,04 % THD, à 4 ohms)
110 (80)* watts par canal (20 Hz –
20 kHz, 0,1 % THD, à 2 ohms)
110 (85)* watts par canal (20 Hz –
20 kHz, 0,1 % THD, à 1 ohms)
220 (160)* watts (monaural) (20 Hz
– 20 kHz, 0,1 % THD, à 4 ohms)
Réponse en fréquence
5 Hz – 100 kHz ( 
-3
 dB)
Distorsion harmonique
0,005 % ou inférieure
(à 1kHz, 4 ohms)
Plage de réglage du niveau d'entrée
0,2 – 4,0 V
Filtre passe-haut
80 Hz, – 12 dB/oct
Filtre passe-bas
50 Hz, 80 Hz, –18 dB/oct
Amplification de basses fréquences (XM-5026
uniquement)
0 – 10 dB (40 Hz)
Alimentation
Batterie de voiture, courant
continu 12 V (masse négative)
Tension d'alimentation
10,5 – 16 V
Courant
à la sortie nominale: 18 (13)* A
Entrée de télécommande: 1 mA
Dimensions
Env. 181 
×
 62 
×
 360 (280)* mm
(l/h/p) (7 
1
/
4
 
× 
1
/
2
 
× 
14 
1
/
4
(11 
1
/
8
)* po.) capuchon de
protection de borne compris
Poids
Env. 2,2 (1,6)* kg (4 li. 10 on.
(3 li. 8 on.)*) accessoires non
compris
Accessoires fournis
Vis de montage (4)
Capuchon de protection de borne (2)
Accessoires en option Cordon de connexion pour
amplificateur de puissance RC-46
Cordon à broche RCA RC-64 (2 m)
Cordon à broche RCA RC-65 (5 m)
*
(XM-4026)
La conception et les spécifications peuvent être modifiées
sans préavis.
Circuit system
OTL (output transformerless)
circuit
Pulse power supply
Inputs
RCA pin jacks
Outputs
Speaker terminals
Speaker impedance
1 – 8 ohms (stereo)
2 – 8 ohms (when used as a
bridging amplifier)
Maximum outputs
150 (110)* watts per channel (at 4
ohms)
220 (160)* watts per channel (at 2
ohms)
440 (320)* watts (monaural) at 4
ohms
Rated outputs (supply voltage at 12.5 V)
50 (40)* watts per channel (20 Hz –
20 kHz, 0.04 % THD, at 4 ohms)
75 (60)* watts per channel (20 Hz –
20 kHz, 0.1 % THD, at 2 ohms)
75 (65)* watts per channel (20 Hz –
20 kHz, 0.1 % THD, at 1 ohms)
150 (120)* watts (monaural) (20 Hz
– 20 kHz, 0.1 % THD, at 4 ohms)
Rated outputs (supply voltage at 14.4 V)
75 (55)* watts per channel (20 Hz –
20 kHz, 0.04 % THD, at 4 ohms)
110 (80)* watts per channel (20 Hz
– 20 kHz, 0.1 % THD, at 2 ohms)
110 (85)* watts per channel (20 Hz
– 20 kHz, 0.1 % THD, at 1 ohms)
220 (160)* watts (monaural) (20 Hz
– 20 kHz, 0.1 % THD, at 4 ohms)
Frequency response 5 Hz – 100 kHz ( 
-3
 dB)
Harmonic distortion 0.005 % or less
(at 1kHz, 4 ohms)
Input level adjustment range
0.2 – 4.0 V
High-pass filter
80 Hz, –12 dB/oct
Low-pass filter
50 Hz, 80 Hz, –18 dB/oct
Low boost (XM-5026 only)
0 – 10 dB (40 Hz)
Power requirements 12 V DC car battery
(negative ground)
Power supply voltage 10.5 – 16 V
Current drain
at rated output: 18 (13)* A
Remote input: 1 mA
Dimensions
Approx. 181 
×
 62 
×
 360 (280)* mm
(w/h/d) (7 
1
/
4
 
× 
1
/
2
 
× 
14 
1
/
4
(11 
1
/
8
)* in.) include terminal
protect cover
Mass
Approx. 2.2 (1.6)* kg (4 lb. 10 oz.
(3 lb. 8 oz.)*) not incl. accessories
Supplied accessories Mounting screws (4)
Terminal protect cover (2)
Optional accessories Connecting cord for power
amplifier RC-46
RCA pin cord RC-64 (2 m)
RCA pin cord RC-65 (5 m)
*
 (XM-4026)
Design and specifications are subject to change without
notice.
+0
+0