Denon dvd-a11 用户手册

ENTER

1

7

0

2

8

+10

3

9

4

5

6

TOP MENU

DISPLAY

MARKER

RANDOM

PAGE

A-B

ZOOM

DIMMER

PIC.ADJ

REPEAT

SETUP

NTSC / PAL

CALL

RETURN

SKIP

SLOW / SEARCH

POWER

ANGLE

SUBTITLE

AUDIO SEARCH MODE

PLAY

STILL / 

PAUSE

STOP

PROG / DIR

CLEAR

SRS.TS

OPEN /

CLOSE

RC-962

ON

OFF

T. MENU

DISP.

MENU

13

2

The DVD-A11 can be controlled from a distance using the included remote control unit (RC-962).

q Remove the remote control unit’s rear cover.

w Place two R6P/AA batteries in the battery

compartment in the direction indicated by the
marks.

e Close the rear cover.

Cautions On Batteries
• Use R6P/AA batteries in this remote control unit.
• Replace the batteries with new ones approximately

once a year, though this depends on the frequency
with which the remote control unit is used.

• If the remote control unit does not operate from

close to the main unit, replace the batteries with
new ones, even if less than a year has passed.

• The included battery is only for verifying operation.

Replace it with a new battery as soon as possible.

• When inserting the batteries, be careful to do

so in the proper direction, following the < and
> marks in the remote control unit’s battery
compartment.

• To prevent damage or battery fluid leakage:

• Do not use a new battery with an old one. 
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or

dispose of batteries in flames.

• Remove the batteries when not planning to use

the remote control unit for a long period of time.

• If the batteries should leak, carefully wipe off the

fluid from the inside of the battery compartment,
then insert new batteries.

30

°

30

°

Approx. 7 meters

• When operating the remote control unit,

point it at the remote control sensor as
shown on the diagram.

• The remote control unit can be used from a

direct distance of approximately 7 meters.
This distance will be shorter, however, if
there are obstacles in the way or if the
remote control unit is not pointed directly
at the remote control sensor.

• The remote control unit can be operated at

a horizontal angle of up to 30° with respect
to the remote control sensor.

NOTES:
• It may be difficult to operate the remote control unit if the remote control sensor is exposed to direct sunlight

or strong artificial light.

• Do not press buttons on the main unit and on the remote control unit at the same time. Doing so will result

in malfunction.

2

Button not explained here function in the same way as the corresponding buttons on the main unit.

Press this to switch the power
between on and standby.

Use these to input numbers.
Use the +10 button to input
numbers of 10 or over.
Example: To input 25

5

+10

+10

The top menu stored on the disc
is displayed.

Use the • and ª cursor buttons
to select in the vertical direction.
Use the 

0

and 

1

cursor

buttons to select in the
horizontal direction.
Press the ENTER button to
select the item selected with
the cursor buttons.

The DVD menu stored on the
disc is displayed.

2

Press this to switch the angle.

Press this to switch the DVD’s
subtitle language.

Use this to repeat sections
between two specific points.

Press this to play tracks
repeatedly.

Press this to display the default
setting screen.

Use this to adjust the brightness
of the main unit’s display. Can
be switched in 4 steps, from
OFF to always on.

Press this to enlarge the image.

Press this to adjust the picture
quality to suit your tastes.

Use this to switch the set’s
video output format (NTSC/PAL).

Press this to switch between
the normal play, programmed
play.

Press this to clear numbers that
you have input.

Sets the virtual surround sound.
(Functions when playing DVD-
videos or VCDs only. (See page
26.))

Press this to return to the
previous menu screen.

Press this to display the ON-
SCREEN.

Press this to check the program
contents.

1

3

Press this to change the search
mode to search for groups or
titles, tracks or chapters when
selecting sections of discs
directly using the number
buttons.

For DVDs, press this to switch
the audio language. For video
CDs, press this to switch the
channel between “LR”, “L” and
“R”.

Press this to play the tracks on
the video or music CD in random
order.

Press this to mark places you
want to see again.

Use these to selected the
desired still picture on DVD
audio discs containing
browseable still pictures.