Nokia 2600 服务手册
RH-59/60
Nokia Customer Care
100
COMPANY CONFIDENTIAL
ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
■
RF control
This menu can be placed in maintenance or in tuning dependent of Phoenix.
It is meant to check the receiver or transmitter without going in call. It works very much like a
call, but you have control via the PC, and not via the tester. The TX mode GSM850 can select
between Free, High and Low mode. It changes the PA mode, but changes also the power level
if a level is selected that is not supported in that mode.
call, but you have control via the PC, and not via the tester. The TX mode GSM850 can select
between Free, High and Low mode. It changes the PA mode, but changes also the power level
if a level is selected that is not supported in that mode.
If you want to tune at other channels than the default, then you must select it first in RF control
and then start the tuning.
and then start the tuning.
If you want to tune at other channels than the default, then you must select it first in RF control
and then start the tuning.
and then start the tuning.