Nokia 2600 服务手册

ISSUE 1 09/2004

COMPANY CONFIDENTIAL

RH-59/60

Nokia Customer Care

■

Updating the JBV-1 Docking Station software

The next step is to install or update the JBV-1 USB drivers which are delivered with the JBV-1
SW installation package. They can be found in folder:

C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver

If there is no previously installed JBV-1 Firmware update package installed on your computer,
Windows will detect connected USB cable and detect drivers for new HW. You will be prompted
about this, please follow the instructions and allow Windows to search and install the best Driv-
ers available.

If there is a previously installed JBV-1 Firmware update package ( v 17 or older) on your com-
puter, please update the JBV-1 USB Driver. Please see the readme.txt – file under

C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver – folder for instructions on
how to update the JBV-1 USB Driver.

After you have installed or updated the JBV-1 USB driver, the actual JBV-1 SW update can be-
gin.

Go to folder C:\Program Files\Nokia\JBV-1 Firmware Update\JBV-1 Firmware Update and start
JBV-1 Update SW by double clicking fwup.exe.

JBV-1 Firmware update starts and shows current satus of the JBV-1 connected.

If firmware version read from your JBV-1 is not the latest one available ( v. 17 or older) , it needs
to be updated to version 18 by choosing “Update Firmware”.

”.

To update your JBV-1 to new version 18 choose file JBV1v18.CDE and “Open”

Please wait, it takes a while until you can hear a “click” from the JBV-1.

The older sw file JBV1v17.CDE is visible in this view only if the previous JBV-1 SW package
has been installed on your computer.