Nokia 2600 服务手册
RH-59/60
Nokia Customer Care
86
COMPANY CONFIDENTIAL
ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
■
RF control
THE purpose of this feature is to check the receiver or transmitter without going in call. It works
very much like a call, but you have control via the PC, and not via the tester.
very much like a call, but you have control via the PC, and not via the tester.
The TX mode GSM900 can select between Free, High and Low mode. It changes the PA mode,
but changes also the power level if a level selected is not supported in that mode.
but changes also the power level if a level selected is not supported in that mode.
If you want to tune at other channels than the default, then you must select it first in RF control
and then start the tuning.
and then start the tuning.