Nokia 2600 服务手册
ISSUE 1 09/2004
COMPANY CONFIDENTIAL
9
Copyright © 2004 Nokia. All Rights Reserved.
RH-59/60
Nokia Customer Care
Phoenix Service SW
■
Before installation
•
Check that a Dongle is attached to the parallel port of your computer .
•
Download the installation package/application file produced in wk 33, 2004 or
higher version (e.g. phoenix_service_sw_a13_2004_08_5_42.exe) to your com-
puter (eg C:\TEMP)
puter (eg C:\TEMP)
•
Close all other programs
•
Run the application file produced in wk 33, 2004 or higher version (e.g.
phoenix_service_sw_a13_2004_08_5_42.exe) and follow the instructions on the
screen
screen
•
Administrator rights may be required to be able to install Phoenix depending on
the Operating System
•
If uninstalling or rebooting is needed at any point, you will be prompted by the In-
stall Shield program.
If at any point during installation you get this message, Dongle is not found and installation can´t
continue.
continue.
Possible reasons may be defective or too old PKD-1Dongle (five digit serial number Dongle
when used with FPS-8 Prommer) or that the FLS-4S POS Flash Dongle is defective or power
to it is not supplied by external charger.
when used with FPS-8 Prommer) or that the FLS-4S POS Flash Dongle is defective or power
to it is not supplied by external charger.
Check the COM /parallel ports used first! After correcting the problem Installation can be re-
started.
started.