Nokia n-gageqd 服务手册
Nokia Customer Care
3 - Service Software
Company Confidential
RH-29
Issue 1 05/2004
Copyright ©
2004 Nokia Corporation
Page 57
Company Confidential
Choose “Testing” and “Bluetooth Locals”.
Enter JBT-9’s Ser.No. (12 digits from the type label) in the field “Counterpart Device
Address”. This has only to be done once as long as JBT-9 will not be changed!
Address”. This has only to be done once as long as JBT-9 will not be changed!
Standard testing parameters as bit frames, hopping mode and number of bits are default
settings by Phoenix. BT Software Operational Mode = Normal Mode.
settings by Phoenix. BT Software Operational Mode = Normal Mode.
Press the “Run BER Test” button to perform the BER test.
“Test done” means that test has successfully been performed; if Bit Error Rate is </=
0.1% the “Result” will be also displayed as “OK”.
0.1% the “Result” will be also displayed as “OK”.
Additional menu functions
BT MCM related self-tests can be performed by pressing “Run Self Tests”. Result has to
be “OK”
be “OK”
The “Version Information” dialog gives you BT MCM related detail information that could
be necessary in case of detailed fault reporting.
be necessary in case of detailed fault reporting.