Panasonic cf-51mcmddbm 用户手册
27
Troubleshooting
The orange indicator blinks
z Battery cannot be recharged temporarily because the internal temperature of the
battery pack is outside of the acceptable temperature range for recharging. Once
the allowable range requirement is satisfied, charging begins automatically. Your
computer can be used normally in this state.
the allowable range requirement is satisfied, charging begins automatically. Your
computer can be used normally in this state.
z When using the application, power consumption is high; therefore there is insufficient
power to recharge the battery.
Reference Manual
The Reference Manual is
not displayed
not displayed
z Is Adobe Reader installed?
If you have uninstalled Adobe Reader, install using the following procedures.
A Select [start] - [Run], input [c:\util\reader\AdbeRdr60_enu_full.exe], then
select [OK].
Install Adobe Reader by following the instructions on the screen.
Install Adobe Reader by following the instructions on the screen.
B Update Adobe
Reader to its latest version.
If your computer is connected to the Internet, start up Adobe
Reader
and
select [Help] - [Updates].
If your computer is not connected to the Internet, select [start] - [Run],
input [c:\util\reader\Acro-Reader_6.0.2_Update.exe], then select [OK].
If your computer is not connected to the Internet, select [start] - [Run],
input [c:\util\reader\Acro-Reader_6.0.2_Update.exe], then select [OK].
Fast User Switching function
Some applications do not
work properly
work properly
z When switching to a different user with the Fast User Switching function, the follow-
ing problems may occur.
• Some applications may not work properly.
• Key combination with
• Some applications may not work properly.
• Key combination with
Fn may not work.
• It may not be possible to set the settings of the display.
• A serial mouse may not work.
• The B's CLiP icon will no longer be shown on the taskbar and CD-RW disc (<Only
• A serial mouse may not work.
• The B's CLiP icon will no longer be shown on the taskbar and CD-RW disc (<Only
for DVD MULTI drive> CD-RW, DVD-RW and +RW discs) cannot be written.
• <Only for models with wireless LAN>
The wireless LAN cannot be used.
In this case, log off all users without using Fast User Switching function, and try the
operation once more. If the problem persists, restart the computer.
operation once more. If the problem persists, restart the computer.
Others
No response
z Press Ctrl+Shift+Esc to open Task Manager and close the software application
which is not responding.
z Is there an input screen (e.g., password input screen at startup) hidden behind
another window? Use
Alt+Tab to check for other windows being displayed.
z After shutting down by pressing the power switch for more than four seconds, press
the power switch to power on and open the application again.
If the program no longer works normally, delete the program using the following
procedure. Then reinstall the program.
[start] - [Control Panel] - [Add or Remove Programs]
If the program no longer works normally, delete the program using the following
procedure. Then reinstall the program.
[start] - [Control Panel] - [Add or Remove Programs]
Battery Indicator