Panasonic cq-vad9200u 用户手册

53

Press []] or [[] to adjust the input level.

Notes: 
¡Press [MODE] to return to the regular mode.
¡The display returns to the previous one if there is no

operation for more than 60 seconds after changing to
the setting menu.

3

: Input level

±0 dB

-3 dB

-6 dB

-9 dB

-12 dB

-15 dB

-18 dB

Normal

Lower

Notes: 
¡If the input level from VTR1 / VTR2 is too high, the audio will not be output normally. 

Adjust the input level so that “OVER” does not appear.

¡After setting the input level

The volume can be adjusted by pressing the [}] or [{] (VOLUME) on the display unit or the remote control.

[}] [{]
(VOLUME)

[}] [{] 
[]] [[]  
(Select/Adjust)
[ENTER]

[MODE]
(End)

q Press [[] or []] to select

the setting.

w Press [ENTER] to set.

: Optical fiber cable is not used.

: Optical fiber cable is used for the DVD player of the unit.

: Optical fiber cable is used for an external device that is 

connected to VTR1.

: Optical fiber cable is used for an external device that is 

connected to VTR2.

VTR2

VTR1

DVD

OFF