Panasonic kx-tca130ex 用户手册

6

• Only use the included base unit (or charger) to charge the battery(ies). Do 

not tamper with the base unit (or charger). Failure to follow these 
instructions may cause the battery(ies) to swell or explode.

• The AC adaptor must remain connected at all times. (It is normal for the 

adaptor to feel warm during use.)

Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show “Please Wait” when the handset is 

placed on the charger if it is not registered to a base unit.

Ensure that the handset is switched on. If it is not on, press and hold 
{ih}

 for few seconds to turn the handset on.

Lift the handset and press {ih} to put the handset in standby mode.

Press and hold {x} on the base unit for about 3 seconds, until the 
registration tone sounds.

Place the handset on the base unit. The registration tone continues to 
sound. With the handset still on the base unit, wait until a confirmation 
tone sounds and w stops flashing.

Note:
• If an error tone sounds, or if w is still flashing, register the handset 

manually. (See manual registration in the KX-TCD300/KX-TCD320/KX-
TCD340 operating instructions.)

• If all registered handsets start ringing in step 2, press {x} to stop. Start 

again from step 1.

• Charge the batteries for about 7 hours before initial use.
• The KX-TCD300 does not feature an answering system.
• Answering system features are available only when this handset is 

registered to the KX-TCD320/KX-TCD340.

TCA130EX(EX).book  Page 6  Friday, January 21, 2005  1:58 PM