Panasonic KX-TDE100 用户手册
3.9 Connection of DECT Portable Stations
Installation Manual
167
3.
Repeat steps 1 and 2 for other CSs, and relocate the CSs when necessary.
a.
Overlap adjacent CS coverage areas where the radio signal strength level is "8" by 5 m to 10 m.
b.
Overlap the CS coverage areas of at least 2 CSs at any location in the installation site.
c.
Make sure that the radio signal strength level is greater than "3" at any location in the service area
required by the user.
required by the user.
Notes
•
If a channel is set, the results of measurement for the 24 slots on the channel are saved each time.
If the same channel is set, the new results override the previous ones. Therefore, a measurement
of 10 channels × 24 slots in total can be made.
If the same channel is set, the new results override the previous ones. Therefore, a measurement
of 10 channels × 24 slots in total can be made.
•
If correct results cannot be obtained (e.g., there are many frame errors), change the location of the
CS and repeat the site survey to select the best location.
CS and repeat the site survey to select the best location.
5 m to 10 m
Channel no. 0
Channel no. 1
Channel no. 0
Channel no. 1
Channel no. 2
Channel no. 3