Panasonic lf-d321 用户手册
VQT9473
76
ENGLISH
Before using non-cartridge discs
Software for use with non-cartridge discs
This product includes software for non-cartridge discs called RAMDiscTool. This software enables you
to take full advantage of the characteristics of non-cartridge discs. This software will be installed auto-
matically when installing the driver software from the included CD-ROM. Confirm the operating require-
ments for RAMDiscTool before use (see below).
to take full advantage of the characteristics of non-cartridge discs. This software will be installed auto-
matically when installing the driver software from the included CD-ROM. Confirm the operating require-
ments for RAMDiscTool before use (see below).
RAMDiscTool
Drive Setting for Non-cartridge Disc
This drive can be set to “Enable to write” or “Disable to write” to non-cartridge discs.
When this drive was shipped from the factory, the Non-cartridge Disc Write Setting was set to the
“Enable to write” mode, so it is normally unnecessary to change this setting.
When this drive was shipped from the factory, the Non-cartridge Disc Write Setting was set to the
“Enable to write” mode, so it is normally unnecessary to change this setting.
Dust Check
There are 3 levels of disc dustiness; level 3 is the dustiest. The results should only be used as a
guide and should not be considered a guarantee of the disc’s ability to read or write.
guide and should not be considered a guarantee of the disc’s ability to read or write.
Write-Protect Setting
With non-cartridge discs, you are unable to use the write-protect tab on the cartridge to protect
your data. This software allows you to protect data only on 4.7 GB non-cartridge discs.
your data. This software allows you to protect data only on 4.7 GB non-cartridge discs.
Once a disc is write-protected, it is valid until canceled by this software.
Note:
•
This software can only be used with 4.7 GB DVD-RAM drive.
•
The software write-protect setting cannot be applied to 2.6 GB DVD-RAM discs.
Operating requirements for RAMDiscTool
Your computer must meet the following requirements to use this software.
Computer
: IBM PC/AT compatible computer
OS
: Windows 98, Windows Me, Windows 2000 (Professional)
Hard disk space
: 1 MB (minimum)