HP Compaq KB-9965 311059-131 用户手册

 

 

  The removal and replacement of the rear and front processor air baffles must 

be completed within 1 minute to prevent possible overheating and damage to hardware.  

To remove the rear processor air baffle:  

1.  Remove the front bezel door (tower model only), and lay the server on its side with the 

access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model 
Only)” in this chapter. 

2.  Remove the access panel. Refer to “Removing the Access Panel” in this chapter. 

3.  Remove the rear processor air baffle by loosening the two thumbscrews that secure it to 

the system tray (1). 

4.  Lift the air baffle up and out of the server (2). 

 

Reverse steps 1 through 4 to replace the rear processor air baffle. 

To remove the front processor air baffle: 

1.  Remove the front bezel door (tower model only), and lay the server on its side with the 

access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model 
Only)” in this chapter. 

2.  Remove the access panel. Refer to “Removing the Access Panel” in this chapter. 

3.  Remove the rear processor air baffle. Refer to “Processor Air Baffles” in this chapter.