Panasonic nv-gs44 用户手册
Editing Mode
-42-
5
To start Audio Dubbing, press the [
;]
Button
(73)
on the Remote Controller.
To Cancel Audio Dubbing
Press the [
Press the [
;] Button
(73)
on the Remote
Controller.
The Movie Camera is in the Still Playback Mode
again.
The Movie Camera is in the Still Playback Mode
again.
To Play Back the Sound Recorded by 12bit
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK]
>> [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK]
>> [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Dubbing.
MIX: It plays back both the original sound and the
sound added by Audio Dubbing
simultaneously.
simultaneously.
To Dub Audio While Listening to a
Pre-recorded Sound
When pausing the audio dubbing, set the
[12bit AUDIO] on the [PLAYBACK] Sub-Menu to
[ST2] and you can check the pre-recorded sound.
When a microphone is used for audio dubbing,
use headphones to listen to the pre-recorded
sound while dubbing the audio. (When using
headphones, set [AV JACK] on the [AV IN/OUT]
to [OUT/PHONES].) When the line input is used,
you can dub audio while listening to the
pre-recorded sound from the speaker.
(The [AV JACK] setting and the line input are on
NV-GS55 Model only.)
Pre-recorded Sound
When pausing the audio dubbing, set the
[12bit AUDIO] on the [PLAYBACK] Sub-Menu to
[ST2] and you can check the pre-recorded sound.
When a microphone is used for audio dubbing,
use headphones to listen to the pre-recorded
sound while dubbing the audio. (When using
headphones, set [AV JACK] on the [AV IN/OUT]
to [OUT/PHONES].) When the line input is used,
you can dub audio while listening to the
pre-recorded sound from the speaker.
(The [AV JACK] setting and the line input are on
NV-GS55 Model only.)
≥For other notes concerning this item, see
-53-
.
Copying on an S-VHS (or a VHS)
Cassette
Cassette
(Dubbing)
After connecting the Movie Camera and the
VCR as illustrated, start the following
procedures.
After connecting the Movie Camera and the
VCR as illustrated, start the following
procedures.
1 AV Cable
2 S-Video Cable
≥If your TV is not equipped with AV Input
2 S-Video Cable
≥If your TV is not equipped with AV Input
Sockets, the 21-pin Adaptor (purchase
separately) is necessary. Consult your dealer.
separately) is necessary. Consult your dealer.
≥Be sure to press the [OSD] Button (
-7-
) on the
Remote Controller prior to copying so that no
indications are visible. Otherwise, the displayed
tape counter and function indications are also
copied.
indications are visible. Otherwise, the displayed
tape counter and function indications are also
copied.
Movie Camera:
1
Insert the recorded Cassette.
VCR:
2
Insert an unrecorded Cassette with an
erasure prevention tab.
≥If various setups (such as external input, tape
erasure prevention tab.
≥If various setups (such as external input, tape
speed, etc.) are required, please refer to the
operating instructions of your VCR.
operating instructions of your VCR.
Movie Camera:
3
Press the [
1] Button to start playback.
VCR:
4
Start recording.
5
Press the Pause or Stop Button to stop
recording.
recording.
Movie Camera:
6
Press the [
∫] Button to stop playback.
21-pin Adaptor
1
2
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
S-VIDEO
IN/OUT
AV IN/OUT
PHONES
REMOTE/MIC
DV
(PLUG IN POWER)
55B-ENG.book 42 ページ 2004年2月4日 水曜日 午前11時54分