Panasonic nv-gs15ege 用户手册
Recording Mode
-19-
Recording Mode
About Recording
When recording pictures on a tape, set the Mode
Dial to Tape Recording Mode [
Dial to Tape Recording Mode [
].
When recording still pictures on a card, set the
Mode Dial to Card Recording Mode [
Mode Dial to Card Recording Mode [
]
(NV-GS15 only).
When recording with the
[AUTO/MANUAL/FOCUS] Switch
When recording with the
[AUTO/MANUAL/FOCUS] Switch
(21)
set to
[AUTO], the Movie Camera automatically adjusts
the focus and white balance. In some cases, they
cannot be adjusted automatically and need to be
adjusted manually. (
the focus and white balance. In some cases, they
cannot be adjusted automatically and need to be
adjusted manually. (
-26-
,
-28-
)
≥Before turning on the power, remove the
Lens Cap. If the Lens Cap is still attached
when the power is turned on, Automatic
White Balance Adjustment (
when the power is turned on, Automatic
White Balance Adjustment (
-26-
) may not
function correctly.
≥When the Recording Pause Mode continues for
more than 6 minutes, the power is turned off
automatically for tape protection and power
conservation. (If the AC Adaptor is used, the
power is turned off only when the tape is
inserted in Tape Recording Mode.) When the
tape is inserted in Tape Recording Mode and if
the Recording Pause Mode continues for more
than 6 minutes, the power is turned off
automatically.
To resume recording from this condition, turn
off, then turn on the power again.
automatically for tape protection and power
conservation. (If the AC Adaptor is used, the
power is turned off only when the tape is
inserted in Tape Recording Mode.) When the
tape is inserted in Tape Recording Mode and if
the Recording Pause Mode continues for more
than 6 minutes, the power is turned off
automatically.
To resume recording from this condition, turn
off, then turn on the power again.
≥When the Movie Camera is connected to a
personal computer with a USB Cable, Standby
mode is not available.
mode is not available.
ª Recording Yourself
By opening the LCD Monitor and rotating it
frontward (to the lens side), you can let the
subject in front of the Movie Camera monitor the
shot while recording is in progress.
frontward (to the lens side), you can let the
subject in front of the Movie Camera monitor the
shot while recording is in progress.
AUTO
MANUAL
FOCUS
(21)
≥When the LCD Monitor is opened, the
Viewfinder is disabled automatically. However,
when the LCD Monitor is rotated frontward, the
image is also shown in the Viewfinder.
when the LCD Monitor is rotated frontward, the
image is also shown in the Viewfinder.
≥If you prefer to have the image on the LCD
Monitor to look like an image in a mirror, set
[SELF REC] on the [LCD/EVF] Sub-Menu to
[MIRROR]. Images are recorded normally and
no left and right reversal occurs.
[SELF REC] on the [LCD/EVF] Sub-Menu to
[MIRROR]. Images are recorded normally and
no left and right reversal occurs.
Recording on a Tape
1
Set the [OFF/ON] Switch
(43)
to [ON].
≥The [POWER] Lamp
(40)
lights up.
2
Set the Mode Dial
(39)
to Tape Recording
Mode.
3
Press the Recording Start/Stop Button
(42)
.
≥Recording starts.
≥After the [RECORD] is displayed, it changes
≥After the [RECORD] is displayed, it changes
to [REC].
4
Press the Recording Start/Stop Button
(42)
again to pause the recording.
≥The [PAUSE] Indication is displayed.
≥The [PAUSE] Indication is displayed.
Recording “Simultaneous Motion/Still Record
Mode” (NV-GS15 only)
≥Even if the Mode Dial is set to Tape Recording
Mode” (NV-GS15 only)
≥Even if the Mode Dial is set to Tape Recording
Mode and the recording to a tape is in progress,
you can also record a still picture on a card by
pressing the [PHOTO SHOT] Button.
you can also record a still picture on a card by
pressing the [PHOTO SHOT] Button.
(43)
(40)
(39)
NV-GS15
NV-GS8/
NV-GS11
NV-GS11
(42)
RECORD
REC
PAUSE
PAUSE
15EGE-ENG.book 19 ページ ２００４年２月９日 月曜日 午前１１時１０分