Panasonic nv-gs33gc 用户手册

Others

• [12bit AUDIO] on the [PLAYBACK] Sub-Menu 

of the [TAPE PLAYBACK MENU] has been set 
to [MIX]. As a result, the original sound and 
sound that was recorded by audio dubbing are 
played back together. It is possible to 
reproduce the sounds separately. (

)

• If you perform audio dubbing on a recording 

made in [16bit] Mode, the original sound will be 
erased. If you wish to preserve the original 
sound, be sure to select [12bit] Mode at the 
time of recording.

4: Sounds cannot be played back.
• Although a Cassette with no audio dubbing is 

being played, is [12bit AUDIO] on the 
[PLAYBACK] Sub-Menu of the 
[TAPE PLAYBACK MENU] set to [ST2]? To 
play back a Cassette with no audio dubbing, 
[12bit AUDIO] must be set to [ST1]. (

)

• Is the Variable Speed Search Function 

working? Press the [

1] Button to cancel the 

Variable Speed Search Function. (

)

• If it is not plugged in tightly, it will not operate 

correctly.

2: The Movie Camera clatters when shaking it.
• It is a sound of the lens moving, not a 

malfunction.

• To disconnect the USB cable safely, 

double-click the [

] icon in the task tray and 

follow the instructions on the screen. 

ª Digital Video System

In a digital video system, images and sounds are 
converted into digital signals and recorded on a 
tape. This complete digital recording is capable of 
recording and playback with minimal image and 
sound deterioration.
In addition, it automatically records data, such as 
Time Code and Date/Time, as digital signals.
Compatibility with S-VHS or VHS Cassettes
Because this Movie Camera employs a digital 
system for recording image and sound data, it is 
not compatible with conventional S-VHS or VHS 
video equipment that employs an analog 
recording system.
The size and shape of the Cassettes are also 
different.

Compatibility with Output Signals
Because AV signal output from the AV signal 
output socket is analog (the same as 
conventional video systems), this Movie Camera 
can be connected with S-VHS or VHS video or a 
TV for playback.

ª Focus

Auto Focus Adjustment
The Auto Focus System automatically moves 
forward and backward the focusing lens inside 
the Movie Camera to bring the subject into focus 
so that the subject can be seen clearly.
However, the Auto Focus System does not 
function properly for the following subjects or 
under the following recording conditions.
Please use the Manual Focus Mode instead.
1) Recording a subject whose one end is 

located closer to the Movie Camera and 
the other end farther away from it
≥Because Auto Focus makes adjustments at 

the centre of an image, it may be impossible 
to focus on a subject that is located in both 
foreground and background.

glass
≥Because the focus is on the dirty glass, the 

subject behind the glass will not be focused.

≥Because the light information that comes 

through the lens decreases considerably, 
the Movie Camera cannot focus correctly.

objects with glossy surfaces or by highly 
reflective objects
≥Because the Movie Camera focuses on the 

objects with glossy surfaces or on highly 
reflective objects, the recording subject may 
become blurry.

≥Because the focus lens-inside moves 

mechanically, it cannot keep up with the 
fast-moving subject.

≥Because the Movie Camera achieves focus 

based upon the vertical lines of an image, a 
subject with little contrast, such as a white 
wall, may become blurry.

ª Time Code

Time Code signals are data that indicate time 
measured in hours, minutes, seconds, and 
frames (25 frames per second). If this data is 
included in a recording, an address is assigned to 
each image on the tape.
≥The Time Code is automatically recorded as a 

part of the sub-code at each recording.

33GC-ENG.book  85 ページ  ２００４年２月２５日　水曜日　午後２時５０分